| |
- Up to two process or limit alarms
for each pen.
- Optional low voltage power input available
for 20-50 VAC or 22-65 VDC.
- Optional Digital Communications package
allows user to access process values, alarm conditions, and other
data.
- Optional configurator port allows
for the use of a PC to modify, save, or download programming parameters.
- Setup/Calibration seal protects the
unit against unauthorized changes.
- Universal inputs and power supply.
- Standard NEMA 3 (NEMA 4X optional)
protects the unit against harsh environments.
- Simple operations and set-up
all of the instructions fit on one 4 x 6 notecard.
- Agency approvals: UL, C-UL, CE and
FM (pending).
|
| The Partlow
MRC 5000 Circular Chart Trend Recorder was designed with simplicity and
functionality in mind. Its operation is so easy that all of its instructions
fit on one 4” X 6” card. It comes in two basic versions for trend recording–one
or two pens.
The straightforwardness of the Partlow
MRC 5000 Circular Chart Trend Recorder is immediately evident just by
looking at the unit’s face. The operator inter-face, a four-digit display
with three-button keypad, is made for simple daily operation and easy
configuration. A clear prompting scheme provides rapid access to all
configuration and operation data. The operator interface also provides
access to test and calibration facilities with a convenient dual function
MODE switch. As if configuring the Partlow MRC 5000 Circular Chart Trend
Recorder wasn’t easy enough already, there’s also an optional Configurator
port for ultimate programming ease. Using the optional PC program, parameters
can be modified, saved, and downloaded in seconds.
A quick look inside the casing and at
the chart itself also speaks to the straightforward, functional design
of the Partlow MRC 5000 Circular Chart Trend Recorder. You will find
just one jumper to configure each port! The two pens, each with configurable
spans, are positioned smoothly without any slidewire feedback; this
simplifies design and improves reliability. In addition, the 10” chart
rotates at the speeds you select.
Finding a place to install this recorder
is easy, with its com-pact 2.5” panel depth and short 1.3” protrusion
from the front panel. And, don’t worry about harsh environments– the
Partlow MRC 5000 Circular Chart Trend Recorder comes standard with a
NEMA 3 rating.
|