 Robust,
portable, and accurate pressure calibration up to 10,000 psi.
- Utilizes formulated hydraulic oil
to reduce wear under high pressure
- Temperature compensation: 0 to 50ºC
- Includes a 3-foot pressure hose and
carrying case
- Weighs only 17.6 lbs.
- Accuracy from 0.05% FS
- High resolution LCD display
- Communications interface standard
- Easy-to-use pump, even at 10,000
psi
- Can withstand a 100% overload without
requiring re-calibration
- Will detect any pressure peak lasting
50ms or more
- 9V battery power supply will last
up to 80 hours
PDF
spec sheet
Precision Pressure Calibrator Tek Know PC700 test pressure is generated
by the integrated hydraulic pump and is read from a four-digit LCD display.
It uses a specially-formulated hydraulic oil, which reduces wear under
high pressures. Operating temperatures range from –10 to 50ºC.
Precision Pressure Calibrator Tek Know PC700 is an obvious choice for
all your pressure calibration needs. It utilizes a special thin film strain
gauge transducer with built-in temperature compensation. Because the thin
film strain gauge is about 1/12 the thickness of a bonded strain gauge,
it’s more flexible. Therefore, accuracy, long term stability, fatigue,
and the product’s life are all improved. Unlike some pressure calibrators,
accuracy is maintained when decreasing pressure, which makes it ideal
for verifying hysteresis.
Precision Pressure Calibrator Tek Know PC700 is calibrated in positive
as well as negative direction. As with all of the Tek Know pressure calibrators,
Windows™-based Pre-Cal software can be interfaced with the standard RS-232
port for semi-automatic calibration and record keeping. |
