 Precision
DC mA, Voltage Calibrator combined with True RMS Process Multimeter /
Calibrator.
The CMM Precision Process Multimeter / Calibrator offers simultaneous
source and measurement of current and voltage. They also can measure temperature,
frequency, duty cycle, pulse width, and resistance—with up to 0.03% accuracy.
The Process Multimeter / Calibrator feature true RMS measurement for non-linear
voltage and current loads, and are programmable for 16 continuous or timed
step outputs, or 999-step ramp. The large dual-display 4,000/40,000 count
backlit LCD shows the primary and secondary source and/or measured values
and functions selected.
This Process Multimeter / Calibrator can source bipolar current (±25mA)
and voltage (±1.5V, ±15V), with a constant current output for loads up
to 500 ohms. A built-in isolated RS-232 interface with optional Windows™-based
software provides advanced data acquisition and documentation functions.
Accessories include input and output test leads, a temperature probe,
9-volt battery, external battery pack, and a protective case.
Calibrator Features
- Simultaneous source and measure
- Bipolar current (±25mA) and voltage
(±1.5V, ±15V) outputs with 0.03% accuracy
- Constant current output for loads
up to 500˝
- Programmable for 16 continuous or
timed step outputs, or 999 step ramp
DMM Features:
- Measure DCmA, ACmA, DCV, ACV, AC+DC,
Temperature, Frequency, Duty Cycle, Pulse Width, Resistance, Continuity,
and Diode
- 1µV or 1µA resolution with 0.03%
basic DCV accuracy
- 1ms Peak Hold for glitch capture
plus Data Hold, relative and dynamic recording.
- ACV and DCV to 600V (CMM-13)
General Features:
- RS-232 interface with optional Windows®
- Large 4,000/40,000 count backlit
LCD displays primary, secondary, source/measure ranges and functions
selected
- Separate input/output banana jacks
with fused protection
- Auto power off with disable function
- Complete with input/output test
leads, temperature probe, 9V battery, external battery pack, protective
holster and pouch case.
Process
Multimeter / Calibrator Spec Sheet |
