| |
|
|
|
Air
Heaters
Air
Heaters are designed to heat flowing air up to 1500ºF.
These highly efficient Air Heaters can be accurately controlled
with a variable voltage source, or with the use of feed
back temperature controls. The compact size of the Air Heaters
and the high efficiencies enable the Air Heaters to be used
for a variety of applications and air flows.
|
|
|
Process
Air and Duct Heaters
Process
Air Heaters and Duct Heaters are available in a wide variety
of wattage's, Voltages and sizes to meet most applications.
Process Air Heaters and Duct Heaters are available with
thermostats, thermocouples or hi Limit cutouts as called
for by the process.
|
| |
|
| |
|
 |
Cast
In Heaters
Aluminum
Cast In Heaters offer a high quality and efficient method
of heating and controlling Extruders, Compression Molding
Platens, Heat Sealers, Vacuum Forming Platens.
The heat cool capabilities of Aluminum Cast In Heaters provide
high accuracy temperature control of +/- 2 degrees.
|
 |
Ceramic
Band Heaters
Ceramic
Band Heaters are high temperature heaters that are long
lasting and now a available with 1 /4" or 1 /2" insulation.
Ceramic Band Heaters are available with high velocity fans
and can be used as efficient Heat/Cool bands that provide
accurate temperatures.
|
 |
Coil
and Cable Heaters
Coil
and Cable Heaters can be used for a variety of applications
where high temperature is required in confined spaces, or
areas where the heaters need to be formed in irregular shapes
ands sizes. |
|
|
Hard
Ceramic Heaters
Hard
Ceramic Heaters are used where extremely high process or
part temperature are required. Hard Ceramic Heaters are
capable of temperatures of 1200ºC or 2200°F. Constructed
out of a hard ceramic shell the heater have a Kanthal or
Nichrome wire that is first coiled and then placed in a
groove. |
|
|
High
Temperature Ceramic Band Heaters
Ceramic
Band Heaters are high temperature heaters that are long
lasting and now a available with 1 /4" or 1 /2" insulation.
Ceramic Band Heaters are available with high velocity fans
and can be used as efficient Heat/Cool bands that provide
accurate temperatures.
|
 |
Mica
and Mineral Band Heaters
Mica
& Mineral Band Heater from Heaters Controls & Sensors
are available in various sizes, voltages, wattage's, and
constructions to suit every application. The Mica Insulated
Band Heater is used for temperatures to 900ºF. The
Mineral Insulated Band Heaters is used for temperatures
to 1400ºF.
|
|
|
| |
|
|
|
Drum
Heaters
Drum Heaters are
a used to control temperatures on a variety of pails or
drums where maintaining viscosity and keeping the contents
fluid are important. Drum
Heaters provide uniform heat and prevent scorching or degradation
of sensitive materials. |
| |
|
| |
|
|
|
Flexible
Rubber Heaters
Flexible
Rubber Heaters are lightweight, ultra thin, water resistant,
ozone resistant heaters and were designed for the aerospace
and aeronautical industry. Flexible Rubber Heaters are available
in a variety of insulating materials and can be manufactured
with wire wound or etched foil. |
| |
|
| |
|
|
|
Cartridge
Heaters
Cartridge
Heaters are available in various sizes from 1/8 inch to
1-1/4 inch in diameter to lengths that are only restricted
by the diameter of the heater. Various lead styles are available
to withstand constant flexing, washdown or extremely corrosive
and moist environments.
|
|
|
Flanged
Immersion Heaters
Flanged
Immersion Heaters are installed by bolting the unit to a
matching flange welded to the vessel. Watt densities from
90 Watts/sq inch, Explosion Proof (NEMA 7), Corrosion Resistant
(NEMA 4X), General Purpose and Standoff Terminal housings
are available. |
|
|
Over
The Side Immersion Heaters
Over
The Side Immersion Heaters tubular elements are designed
for installation from the top of tanks where through-the-wall
heaters cannot be installed. Over The Side Immersion Heaters
are available in many configurations, with partially unheated
sections, thermostats, washdown ox corrosion resistant enclosures.
|
|
|
Quartz
and Teflon Heaters
Quartz
and Teflon Heaters over
the side construction enable easy installation and replacement.
Liquid tight terminal covers prevents entry of liquids.
Thermostats or high limit thermal fuses are available as
options and prevent heater damage due to loss of liquid
or low liquid.
|
 |
Recirculation
Heaters
The
wide variety of options make Circulation Heaters suitable
for most applications like Heating Fuel oil, Air, Steam
Superheating, Corrosive gases & liquids, Water and or
delicate liquids like brewers grain for Beer. |
|
|
Screw
Plug Immersion Heaters
Screw
Plug Immersion Heaters are installed in medium to small
size containers at pressures up to 3000 PSI. Watt densities
from 90 Watts/sq. inch, Explosion Proof (NEMA 7), Corrosion
Resistant (NEMA 4X), and General Purpose Terminal housings
are available. |
| |
|
| |
|
|
|
Radiant
Heaters
Radiant
Heaters are available in a variety of constructions like
hard ceramics to quartz to tubular elements with reflectors.
Radiant Heaters are capable of transmitting radiant energy
from low to medium wavelengths.
|
| |
|
| |
|
|
|
Strip
Heaters
Mica
Strip Heaters are available in a number of constructions
depending on the material to be heated and the application.
Sheath temperatures are typically 700ºF to 1400ºF
depending on construction, watt density sheath material
and type of insulation used.
|
| |
|
| |
|
 |
Tubular
Heating Elements
Formed tubular
heating elements provide an economical, robust, and versatile
heat source. These elements are commonly used to fit into
milled grooves for hot runner molding systems. The precision
fit optimizes heat transfer to the working surface. Heaters
Controls & Sensors can provide formed elements “ready
to go” into your existing channel or new tool design. |
| |
|
|
|
|
|
Heated
Hose
Heated
Hose from Heaters Controls & Sensors is
manufactured with high quality Teflon hose that are FDA
and CSA approved. Heated
Hose has a smooth Teflon
Core which is electrically heated for continuous operation
to high temperatures of 450º F (232ºC).
|
|
|
FuzyPro
Hot Runner Systems
FuzyPro
Hot Runner Systems feature continuous auto tuning for tighter
control at all temperatures. FuzyPro Hot Runner Systems
have a heater break alarm or heater loss alarm and indication
option. We offer an optional heater break or deviation buzzer
for fault conditions.
|
|
|
Hot
Runner System
The
Hot Runner System also features LED's for under temperature
or over temperature indication, Heat load on/off, Ramp start,
and Open or closed loop operation. The display can also
be set for set point or process temperature indication and
a +/- 3 degree indicator flashes when process temperature
is within 3 degrees of setpoint.
|
|
|
Industrial
Furnaces and Ovens
Industrial
Furnaces & Ovens are manufactured by Heaters Control
& Sensors for a large variety of industrial applications.
These include air drying, paint finishing, resins and rubber
curing, preheating chemicals or in line process heating
and control.
|
