9900, 8800, 4400 Series Level
Gauge from Kenco Engineering

9900 Level Gauge

Level Gauge With Integral Valves The 9900 Series Level Gauge has integral offset pattern valves and ball check shutoffs. The gauge incorporates inline 1/4" FNPT vent and drain connections. Because the vent and drain connections are inline and the valves are offset, the glass tubing does not have to be removed for cleaning The centerline dimensional tolerance is ± 1/16" to insure all gauges will make up with your tank's process connections. The sight tube of the 9900 Series Level Gauge is totally enclosed to provide protection for your personnel. These gauges are designed for low to medium pressure applications and are available in a variety of process connection configurations. APPLICATIONS: For low or medium pressure applications, oil or fuel storage tanks, cooling tower water tanks and boiler feedwater tanks.

 

	SPECIFICATIONS Wetted Materials
	End Connections:	Zinc Plated Carbon Steel 316 Stainless Steel
	Sight Tube:	5/8" O.D. Borosilicate (Standard) 5/8" O.D. Red Line Glass (Optional)
	Seals:	Fluorocarbon, Buna-N, PTFE Encapsulated Silicone, Aflas, or Ethylene Propylene
	Valve Stem & Ball Checks:	316 Stainless Steel
	Valve Stem Packing:	Braided PTFE

Pressure and temperature are dependent on the length of glass and the elastomer chosen. Please consult the factory for minimum and maximum pressure and temperature constraints.

DIMENSIONAL INFORMATION

8800 Level Gauge

Level Gauge With 90° Connections The 8800 Series Level Gauge features 90° connections for ease of installation. The Gauge is fitted with inline 1/4" FNPT vent and drain connections. Because the vent and drain connections are inline, glass cleaning is easy. The centerline dimensional tolerance is ± 1/16". This assures that the gauge will fit the mounting connection of the tank. The sight tube of the 8800 Series Level Gauge is totally protected. Three sides of the gauge are enclosed with a metal frame, while the face of the gauge is protected with a polycarbonate shield. Refer to the Bulk Tank Pump Setting gauge bulletin to see the assortment of shield options. APPLICATIONS: For low or medium pressure applications, oil or fuel storage tanks, cooling tower water tanks and boiler feedwater tanks.

 

	SPECIFICATIONS Wetted Materials
	End Connections:	Zinc Plated Carbon Steel 316 Stainless Steel Polyvinyl Chloride (PVC)
	Sight Tube:	5/8" O.D. Borosilicate (Standard) 5/8" O.D. Red Line Glass (Optional)
	Seals:	Fluorocarbon, Buna-N, PTFE Encapsulated Silicone, Aflas, or Ethylene Propylene
	Pressure and temperature are dependent on the length of glass and the elastomer chosen. Please consult the factory for minimum and maximum pressure and temperature constraints.

DIMENSIONAL INFORMATION

NOTE: Dimensions above represent Gauges with carbon steel/stainless steel wetted parts only. Gauges with PVC wetted parts are constructed differently and have different length subtracters. Consult factory for additional information.

4400 Level Gauge

Close-Mount Level Gauge The Kenco Close-Mount Level Gauge is ideally suited for application in which the level gauge must be mounted with a minimum of protrusion from the tank. Application: Packaged hydraulic equipment, steel mill pumps and hydraulic presses. The design of these gauges affords easy installation. Simply install the male thread adapter into the tank connection and then slide the gauge housing over these adapters and bolt gauge into place. The glass is protected from breakage by the gauge housing. SPECIFICATIONS: Max. Pressure: 135 PSIG at 150°F 60" long non-steam service. Max. Temperature: 250°F at static head pressure. Materials of Construction: Housing - Chrome Plated CA-260 brass Sight Tube - Redline Borosilicate glass Seals - Nitrile N674-70 (Buna-N) Process Connection - Chrome Plated 360 brass Centerline lengths - 6-60" in 1" increments