For Use on Horizontal 55 Gallon Tanks
- Saves Chemicals!
Set your chemical pump accurately
- Saves Money!
Reduce inventory cost by seeing actual content of drum
- Ease of
Installation!
Inserts in 3/4" NPT outlet of drum head
- Corrosion
Protection!
Available in a wide range of materials for ultimate corrosion
resistance
|
596 Drum Gauge Mounts in the 3/4" outlet of a horizontal
55 gallon drum. The glass sight tube is protected by
a cast aluminum frame which is calibrated in gallons
and liters indicating liquid content of the drum.
|
599 Drum Gauge Is supplied with a 3/4" ball valve
which when closed provides a means for checking the
pump rate of a chemical pump. The connection for the
chemical pump suction port is 1/4" NPT and is located
on the front of the mounting nipple.
|
|
779 Drum Gauge Comes complete with a spring loaded
test valve for checking injection rates of chemical
pumps. This gauge also mounts in the 3/4" tank outlet
and indicates tank volume in gallons and liters. The
connection for the chemical pump suction line is 1/4"
NPT and is located as shown in the photograph.
|
779-KS Drum Gauge Is designed to accommodate the
mounting of some diaphragm operated chemical pumps on
its side mounted 1/4" NPT outlet. Use this gauge to
check the operation of any chemical pump. It the check
valve of the chemical pump is not functioning properly
the fluid level in the sight tube of the drum gauge
will pulsate between pump strokes when the valve of
the gauge is closed.
|
| Product
Selection Guide |
| Wetted
Materials |
Visual
Gauge |
Gauge
with Ball Valve for Rate Testing |
Gauge
with Spring Loaded Test Valve |
Gauge
with Test Value and Side Mounted 1/4" Outlet |
| Carbon
Steel, Glass, Fluorocarbon |
596 |
599 |
779 |
779-KS |
| 304
Stainless Steel, Glass, Fluorocarbon |
596-S |
599-S |
779-S |
779-KS-S |
| PVC,
Glass, Fluorocarbon |
596-PVC |
NA |
779-PB |
NA |
Note: Aluminum
Frame Not Wet with Chemical
NA = Not Available
Operating
Instructions To check the pumping rate of a chemical pump -- depress
the valve handle (or close the ball valve) closing the gauge glass
off from the drum. Hold the valve closed for one minute and observe
the change in level on the scale cast inside the gauge frame.
The scale on the left hand side of the gauge is calibrated in
quarts per twenty-four hours and the right is calibrated in liters
per twenty-four hours.
The maximum pump
rate for the drum gauge is 25 gallons per day.
|
787 Drum Gauge Provides a visual gauge indicating
the chemical content of the drum and is supplied with
a 2" ell for refilling the drum. The gauge is secured
to the malleable iron elbow with a stainless steel clamp.
|
810 Drum Gauge Is supplied with a vented 2" malleable
iron elbow for refilling the drum and a test valve for
checking the pumping rate.
|
|
779-PB Drum Gauge Has a heavy-duty Schedule 120PVC
head with a push-pull test valve. The Drum Gauge frame
is our standard cast aluminum. There is a brace to support
the weight of the gauge that is connected to the top
of the drum rim and it also stabilizes the gauge from
lateral movement. It has a 1/4" female NPT outlet.
|
Optional
Vent Connection
The Drum Gauges are vented to atmosphere. These gauges
can be supplied with a 1/4" NPT connection to vent
the gauge back into the tank. To specify gauges with
this connection, add "V" to the product number, i.e.
779-V
|
| Product
Selection Guide |
| Wetted
Materials |
Gauge
with Malleable Iron Filler Neck |
Gauge
with Malleable Iron Filler Neck and Test Valve |
| Carbon
Steel, Glass, Fluorocarbon |
787 |
810 |
| 304
Stainless Steel, Glass, Fluorocarbon |
787-S |
810-S |
| PVC,
Glass, Fluorocarbon |
NA |
810-PVC |
Other O-Ring
Compounds Available Upon Request
Repair
Kits Gauge Glass Repair Kits
- Gauges without
Vent Connections....................A 593K
- Gauges with
Vent Connections........................A593KV
Valve Repair
Kits.......................................................A
943K
Valve
Assemblies Complete with "U" Bolts
| Valve
Assembly Part No. |
596 |
599 |
779 |
779-KS |
787 |
810 |
| Model
No |
. |
598 |
6434 |
1208 |
1048 |
598-8 |
1210 |
For 304 Stainless
Steel valve assemblies add the suffix S to the part number and
PVC to the part number for PVC valve assembles (Example: 598-PVC)
929
Series of Pump Setting Gauges
This
series of gauges provides a means for checking the pumping rate
of any chemical pump UNDER ACTUAL PUMPING CONDITIONS IN ONE MINUTE.
The gauge mounts in the pump's suction line between the reservoir
tank and the pump. It provides a visual gauge showing the liquid
level in the reservoir in addition to a rapid means for setting
the pump.
Model 929
- 13" Cast Aluminum
Frame
- Carbon Steel
Test Valve
- Each Division
is Pump Rate of 1 Qt/24 Hrs.
- Wetted Parts
Carbon Steel, Fluorocarbon and Glass
Model 929-1-S
- 13" Cast Aluminum
Frame
- NO Test Valve
- Wetted Parts
304 Stainless Steel, Flourocarbon, and Glass
- Each Division
Pump Rate of 1 Qt/24 Hrs.
Model 929-2
- Coupler Plug
for Movable Installation
- 13" Cast Aluminum
Frame
- NO Test Valve
- Wetted Parts
304 Stainless Steel, Flourocarbon, and Glass
- Multiple Point
Use
| Model
Number |
Maximum
Pump Rate |
Overall
Length |
Mounting
Thread |
Top
Connection |
| 929 |
10
GPD |
13-3/4" |
1/4"
Female NPT |
1/4"
Female NPT |
| 929-1-S |
10
GPD |
13-3/4" |
1/4"
Male NPT |
1/4"
Female NPT |
| 929-2 |
10
GPD |
13-3/4" |
Female
Coupler Plug |
1/4"
Female NPT |
Accessory
Items
- 1061 Steel
Coupler with 1/4" male NPT for movable (929-2) Gauge
- 933-M Test
Valve Only
- 933-P Test
Valve with 1061 Coupler
Buna-N
O-Rings available on request.
