Low Flow Meter Model 1618
Accurate
Measurement of Oil Consumption
Provides
an Indication of Engine Condition
Counter
Immersed in Oil, assuring Maximum Resistance to Wear
from Vibration
The Kenco
1618 Meter gives you a constant and accurate measurement
of oil consumption. This meter has been used in gas
and oil transmission companies for many trouble-free
years of service.
The 1618
Meter provides a constant and accurate record of oil
consumption:
- for "make-up" in
the crankcase
- of the power cylinder
lubricators
- of the compressor
cylinder lubricators
The Kenco
Oil Meter is a positive displacement meter, which has
no minimum flow requirement. The meter registers to
9999.99 gallons.
Maximum
designed inlet pressure is 50 PSI and maximum flow of
5 gallons per hour The meter is factory tested for accuracy
of 0.75%.
OIL FLOW
CHARACTERISTICS
Low Flow
Meter Installation Instructions:
For gravity
flow, the minimum recommended static head is 12' above
the Oil Controller. To insure sufficient oil flow, the
minimum recommended piping to the meter is 1" pipe.
In many instances due to oil viscosity or temperature,
it is desirable or essential to preheat oil before it
enters the meter.
