 Designed
to solve the following problems in the handling of corrosive fluids:
- Three parts come into contact
with the liquid:
a. O-ring
b. Glass (inner tube)
c. Glass tube holder (PTFE)
- The level gauge will operate
in a medium pressure range up to 500 PSI
- Extra protection from an armored
shield and outside tube of polycarbonate to protect the inner
tube from breakage.
CONSTRUCTION FEATURES
- The process piping is supported
by the gauge frame. This frame protects the glass tube from
mechanical stress and impact. The frame is available in powder
epoxy-coated carbon steel, stainless steel, fiberglass, or PVC.
- The tube holders isolate the
process fluid from the gauge frame. They are normally provided
in PTFE. Other materials are available, such as type 316 SS
of Alloy 20.
- Sight tube -- Standard material
is borosilicate glass, however, any clear tubing may be used.
- Outer protective tube is normally
supplied in clear polycarbonate tubing which has a high impact
strength (lzod impact range: 12-16 feet, Lb./in.). Other materials
may be supplied.
Lower
Installation Costs
One piece gauge is easily installed.
Does not require multiple tank connections or expensive pipe required
with reflex type gauges.
Easy to Read Liquid Level
One piece gauge has no blind spots
and the slotted frame provides see-through viewing of the liquid.
ACCESSORIES
| Flanged 90
degree connectors available with PTFE lining |
Threaded 90
degree connectors |
Illuminators |
Height scales
lexan or
304 SS. |
|
