|
LA12-_0_1 |
 |
|
|
| Patent Pending |
|
|
|
Application |
| The two-wire, low cost alphasonic level transmitter is mounted through the top wall of the tank and provides continuous measurement up to 10 feet. This device is ideal for use with general purpose day storage tanks, process vessels and drums.
The transmitter is best applied in non-coating or scaling type liquids including clean water, acid and chemical solutions. The acoustic wave guide reduces the measurement space down to 1/2 inch while separating foam from the point of measurement.
|
|
|
|
Specifications |
|
Range:
|
0.3' to 10' (9 cm to 3m) |
|
Accuracy:
|
± 1% of span in air |
|
Resolution:
|
0.125" (3 mm) |
|
LED indication:
|
Power status |
|
Supply voltage:
|
14-36 VDC |
|
Loop resist.:
|
600 Ohms @ 24 VDC |
|
Signal output:
|
4-20 mA, two-wire |
|
Signal invert:
|
4-20 or 20-4 mA |
|
Calibration:
|
Potentiometer |
|
Process temp.:
|
F: -40° to 140°
C: -40° to 60° |
|
Temp. comp.:
|
Automatic |
|
Electronics temp.:
|
F: -4° to 140°
C: -20° to 60° |
|
Pressure:
|
Atmospheric |
|
Enclosure rating:
|
NEMA 4X (IP65) |
|
Installed height:
|
5.9" (15 cm) above tank process mount |
|
Encl. material:
|
PP, UL94VO |
|
Guide material:
|
PVC, PP or PVDF Kynar® |
|
Process mount:
|
1" NPT (1" G) |
|
Mount. gasket:
|
Viton® (G version only) |
|
Conduit entrance:
|
Single, 1/2" NPT |
|
Classification:
|
General purpose |
|
CE compliance:
|
EN 50082-2 immunity
EN 55011 emission |
|
|
Click here to download above specifications in a PDF file format. |
|
|
|
|
|
Technology |
|
ALPHASONIC |
|
General purpose |
Yes |
|
Conductive |
Yes |
|
Non-conductive |
Yes |
|
Conductivity |
Yes |
|
Clean |
Yes |
|
Foam |
Yes |
|
Contact |
Yes |
|
Non-coating |
Yes |
|
Ambient pressure |
Yes |
|
Low pressure |
No |
|
Medium pressure |
No |
|
Intrinsically safe |
No |
|
Non-contact |
No |
|
Dirty |
No |
|
Coating |
No |
|
Integral relay |
No |
|
Vapors |
No |
|
Gas density |
No |
|
Vacuum |
No |
|
|
|
