Plant,Maintenance,Products

Plant Maintenance Products

Transvector®Vacuum Pumps

ITW Vortec's Transvector® Vacuum Pumps pull liquids directly into
55 gallon drums quickly and efficiently. Drum-emptying capabilities
may be added with Vortec's Dual Mode TVPTM Transvector Vacuum Pump.

All Vortec Transvector Vacuum Pumps feature:

  • Fast setup -- install on drum in less than a minute.
  • No moving parts; constructed with materials designed for years of reliable operation.
  • Automatic safety shut-off valve to prevent overflows.
  • Durable aluminum and steel tools plus heavy-wall, smooth-bore PVC hose with quick-release coupling.
  • Optional wand and squeegee (Model 2102) to add spill pick-up capabilities.

The Dual Mode TVP Transvector Vacuum Pump offers these additional features:

  • Switch between empty and fill modes in less than 10 seconds.
  • Spring-loaded pressure relief valve.
Models:
        WATER FLOW RATE (GPM)
Model No. *
INLET PRESSURE PSIG (BAR)
AIR CONSUMPTION SCFM (SLPM)
VACUUM (INCHES OF MERCURY)
FILL
EMPTY
2101
100 (6.9)
22.5 (637)
8.7
40.0
--
2104
100 (6.9)
22.0 (623)
10.5
29.5
45.0

* Includes pump, ball valve, safety shut-off valve, 1.5" (4cm) I.D. vacuum hose (10' (3m) length) with coupling, 18" (46cm) aluminum wand and evacuation tube (Model 2104 only).

40 to 100 PSIG (2.8 - 6.9 Bar) compressed-air source required for operation.

The TVP and Dual Mode TVP are not intended for use with flammable or volatile liquids such as gasoline, alcohol, kerosene, aviation fuel, mineral spirits or any materials that have a low flash point.

Back to Top of Page
 

Hand-E-VacTM Industrial Cleaning Guns

Vacuuming or blow off is fast and efficient with the Hand-E-Vac™ Industrial Cleaning Gun. Hand-E-Vac is powerful yet economical and easy-to-use. The compressed-air-powered Hand-E-Vac switches from a vacuum to a blow gun in seconds simply by reversing the nozzle insert. A complete range of Hand-E-Vac accessories is available for total industrial cleaning versatility. Use Hand-E-Vac DH to remove chips from deep holes after drilling. All Hand-E-Vac models are made of impact-resistant materials for durability and have no moving parts to break.

Models:
Choose the Hand-E-Vac Gun and Accessory Kit that best fits your application:

 

MODEL NO.
 DESCRIPTION
2001
 Hand-E-Vac gun only.
2007
 Hand-E-Vac DH Deep-Hole gun only.
2004
 Hand-E-Vac Accessory Kit, includes 2 Extension Rods, Crevice Tool, Skimmer Tool and Brush.
2010
 Hand-E-Vac Conveying Kit, includes Extension Rod, 10' (3m) Hose and Clamp.
2011
 Hand-E-Vac Bag Kit, includes Extension Rod, Dust Bag and Clamp.
2012
 Hand-E-Vac Waste Containment Kit, includes Extension Rod, 10' (3m) Hose, Drum Cover, Hose Clamps and Clip.
Back to Top of Page
 

Spill Pick-Up System ®

ITW Vortec's Spill Pick-Up System ® picks up virtually any non-volatile industrial spill quickly and conveniently, eliminating the need for socks, pads or absorbents. Use it to clean up spilled coolant, oil, hydraulic fluid, sludge, water and more. The Spill Pick-Up System has no motors to burnout or moving parts to break for years of reliable operation.

Features:

  • Picks up nonvolatile liquids directly eliminating absorbent, sock and pad disposal costs. Also picks up sludge and wet absorbent.
  • Powered by compressed air (25 SCFM/708 SLPM at 80 PSIG/5.6 Bar) - no motors to burnout or moving parts to break for years of reliable operation.
  • Automatic safety shut-off prevents overflows.
  • Includes 5-gallon canister, swivel suction hose connection and wand with squeegee.
  • Components are resistant to most nonvolatile industrial chemicals.
  • Canister lid removes for easy cleaning.

Models:

MODEL NO.
 DESCRIPTION
2201
 Spill Pick-Up System complete with canister, wand, squeegee and ball valve.

Back to Top of Page


Plant Maintenance Products