| Amiad Fertilizer and Chemical Injector Units |
- No external power supply needed.
- The linear hydraulic motor is powered by the
hydraulic pressure of the irrigation system.
- The unit is resistant to nearly all known chemicals
presently used in agriculture and horticulture.
- For the injection of a set amount of fertilizer,
a small hydrometer can be installed on the
water inlet of the injector.
The hydrometer can be set to stop the injector's
operation when the preset amount has been injected.
|
Suction type injectors (4-01)
Technical Specifications:
| Injection rate: |
Up to 250 liters/hr (1.04 USgpm) |
| Min. pressure: |
1.5 bar = 21 psi |
| Max pressure: |
7 bar = 100 psi |
| Water consumption: |
3 times the quantity of chemical injected. |
| Gross weight: |
5 kg = 11 lb. (packed) |
| Construction materials: |
Chemical resistant engineering plastics;
stainless steel;
Viton seals for parts in contact with chemicals |
|
|
| Gravity Feed type injectors (4-02)
Technical Specifications:
| Injection rate: |
Up to 250 liters/hr (1.04 USgpm) |
| Min. pressure: |
1.5 bar = 21 psi |
| Max pressure: |
7 bar = 100 psi |
| Water consumption: |
3 times the quantity of chemical injected. |
| Gross weight: |
5 kg = 11 lb. (packed) |
| Construction materials: |
Chemical resistant engineering plastics;
stainless steel;
Viton seals for parts in contact with chemicals |
|
|
| Duplex fertilizer injector
The duplex injector unit is made up of 2 Amiad injectors on one carrier. The Amiad duplex has been developed for the the injection of large quantities of fertilizer or chemicals into the water system.
although the duplex is made from two injectors, it has one water-drive line, one chemical-feed line and one injection outlet. Same accessories and parts as the standard injector.
Technical Specifications:
| Injection rate: |
Up to 500 liters/hr (2.08 gpm)
According to mains pressure. |
| Min. pressure: |
1.5 bar = 21 psi |
| Max pressure: |
7 bar = 100 psi |
| Water consumption: |
3 times the quantity of chemical injected. |
| Gross weight: |
7 kg = 15 lb. (packed) |
| Construction materials: |
Chemical resistant engineering plastics;
stainless steel;
Viton seals for parts in contact with chemicals |
|
|
