TMB Fertilizer Injectors Line
From 8 to 600 l/h (0.035 - 2.64 USgpm)
- The TMB fertilizer injector evenly distributes the fertilizer through the irrigation system. The fertilizer solution is injected into the irrigation system, where it is mixed with the flowing water and then sprayed through the drippers or sprinklers.
- The unit is driven solely by the water picked up from the irrigation line itself and can be operated anywhere in the field, as long as the water pressure exceeds the minimum requirements per unit.
- The stainless steel and diaphragm construction of these injectors, as well as their slow operation rate, makes them suitable for high temperature environments, for sites where the water supply contains large quantities of sand and for fertilizer solutions that contain high loads of particles.
-
- The injectors can be easily adapted to an electronic control system.
|
| Amiad TMB 50L
Technical Specifications:
| Injection rate: |
8 - 50 l/hr |
0.035 - 0.22 USgpm |
| Water pressure: |
2 - 8 bar |
30 - 120 psi |
| Connections: |
1/2" |
1/2" |
| Weight: |
3.5 kg |
7.7 lb |
| Cat. No. |
08-5005 |
| Water consumption: |
2 times the quantity of chemical injected |
| Construction materials: |
Body, springs, shaft: Stainless steel
Diaphragms: NBR & Natural rubber
O-rings: NBR & Viton
Plastic parts: PP,PA,PVC & Teflon |
|
|
| Amiad TMB 250L
Technical Specifications:
| Injection rate: |
15 - 250 l/hr |
0.22 - 2.64 USgpm |
| Water pressure: |
2 - 8 bar |
30 - 120 psi |
| Connections: |
3/4" & 1/2" |
3/4" & 1/2" |
| Weight: |
12 kg |
26.5 lb |
| Cat. No. |
08-5025 |
| Water consumption: |
2 times the quantity of chemical injected |
| Construction materials: |
Body, springs, shaft: Stainless steel
Diaphragms: NBR & Natural rubber
O-rings: NBR & Viton
Plastic parts: PP,PA,PVC & Teflon |
|
|
Amiad TMB 600L
Technical Specifications:
| Injection rate: |
50 - 600 l/hr |
13 - 158 USgpm |
| Water pressure: |
2 - 7 bar |
30 - 100 psi |
| Connections: |
3/4" |
3/4" |
| Weight: |
24 kg |
53 lb |
| Cat. No. |
08-5060 |
| Water consumption: |
2 times the quantity of chemical injected |
| Construction materials: |
Body, springs, shaft: Stainless steel
Diaphragms: NBR & Natural rubber
O-rings: NBR & Viton
Plastic parts: PP,PA,PVC & Teflon |
|
|
Back
|
