Horizontal
Thermoplastic Centrifugal Pumps
 These
quality built end suction thermoplastic pumpswith
centerline discharge and back pullout construction, combine
the award winning wide open seal area features of the innovative
Chem-GardŽ line of thermoplastic pumps with the standard
dimensional and performance characteristics embodied in
ANSI specification B 73.1 developed for the process industries. |
Multi-parameter Controllers
& Analyzers
 SHARK
is designed to be the most flexible, easy to use, and easy
to see multi-parameter analyzer/controller on the market. Select
the parameter you wish to measure from the easy-to-use LCD
menu on the inside front cover. Choose pH, ORP, Conductivity
or Flow. |
|
Portable
Submersible Pumps
 Portable submersible pumps from CH&E with sealed junction
chamber and abrasive resistant rubber coated hydraulic
parts. Heavy duty oversized ball bearings with thermal
overload protection with stainless stee shaft and hardware.
These pumps have a durable lightweight housing and the
parts are intechangeable with the modular system minimizing
spare parts requirements. The pump is guaranteed to run
dry.
|
|
Sethco Self Priming
Magnetic Drive Seal-less Centrifugal Pumps
 Designed
for Corrosive Liquid and Chemical Transfer
Sethco magnetic drive, seal-less pumps are precision
designed to meet the demands of a wide range of OEM, chemical
and industrial applications. These pumps can be used for
highly corrosive or mild chemicals, acids or solvents.
|
|
 |
|
Dual
System Process Control Instrument
 The
LiquiVision
is a dual system process control instrument, designed
to handle many types of applications. Available in only
one mode, it comes standard with popular features, many
of which are automatically activated.
As standard, it comes with
three IntelliSense connections (allowing for the use three
general sensor inputs, two general sensor inputs and one
multipurpose input/output or one general sensor input
and two multipurpose inputs/outputs), four selectable
replays, one alarm relay, six taggable timers, two flow
switch inputs, and two inputs suitable for use with dry
contact or hall effect water meters.
The LiquiVision's capability
can be maximized to allow it to handle up to two multipurpose
IntelliSense inputs/outputs and any combination of up
to four conductivity, toroidal, pH or ORP IntelliSense
inputs.
|
|
Pacer
Mag-Drive Centrifugal Pumps
 Series X40, X50, X100
Pumps
can be constructed to accomodate a wide variety of applicaitons
such as, photo-processing, water and waste treatment,
semiconductor, industrial chemical processing, high purity
DI & RO water, pulp and paper chemical processing,
fume scrubbing and plating to name a few.
|
|
Blacoh Sentry Pulsation
Dampeners
 Positive
displacement pumps create pulsation and hydraulic shock
purely by the reciprocating nature of the pump's stroking
action. During the discharge stroke of a pump, fluid pressure
takes the line of least resistance, displacing the bladder
in the dampener, thus compressing the trapped gas. As the
pump begins its next cycle, fluid flow stops momentarily
allowing the compressed gas to expand, forcing the bladder
to push the accumulated fluid back into the discharge line
filling the void created by the pump's cycle shift. Whether
a piston, plunger, air diaphragm, peristaltic, gear, or
diaphragm metering pump, SENTRY Pulsation Dampeners placed at the pump's
discharge will produce a steady fluid flow up to 99% pulsation
free; protecting the entire pumping system from the damaging
effects of shock. |
|
