|
FT10 Series |
 |
|
|
|
|
|
|
Application |
| The flow switch set point may be adjusted from 0.04 to 3 fps and is an excellent choice for a wide range of relatively clean, non-coating or scaling type liquids. Media examples include hydrochloric acid, lubrication oil and glycol solutions.
The relay output provides a reliable switch interface with remote devices such as a PLC, SCADA or alarm. The short sensor is intended for use in pipe sizes from 1/2 inch to 1 1/2 inch; the long sensor is applied from 2 inches up. |
|
|
|
Specifications |
| Set point range: |
0.04 to 3 fps (0.012 to 0.91 mps) |
| Factory set point: |
0.2 fps (.06 mps) |
| Repeatability: |
±.5% of set point |
| Response time: |
1-10 seconds |
| Set point adjust.: |
Potentiometer |
| Viscosity range: |
1-200 centipoise |
| Supply voltage: |
12-36 VDC |
| Consumption: |
70 mA maximum |
| Contact type: |
(1) SPST relay |
| Contact rating: |
120 VAC/VDC @ 1A |
| Contact output: |
Selectable NO/NC |
| Process temp.: |
F: 32° to 140°
C: 0° to 60° |
| Electronics temp.: |
F: -40° to 140°
C: -40° to 60° |
| Pressure: |
150 psi (10 bar) @ 25° C.,
derated @ 1.667 psi (0.113 bar)
per °C. above 25° C. |
| Sensor rating: |
NEMA 4X (IP65) |
| Sensor material: |
1__5: PP-Ryton®
5__5: PVDF Kynar® |
| Cable jacket mat.: |
1__5: PP
5__5: PFA Teflon® |
| Cable type: |
4-conductor, #22 AWG (shielded) |
| Cable length: |
Standard: 10' (3m)
Special order: 25' (7.6m) or 50' (15.2m) |
| Process mount: |
3/4" NPT (3/4" G / Rp) |
| Mount. gasket: |
Viton® (G version only) |
| Classification: |
General purpose |
| CE compliance: |
EN 50082-2 immunity
EN 55011 emission
EN 61010-1 safety |
|
|
Click here to download above specifications in a PDF file format. |
|
|
|
|
|
Technology |
|
LIQUID |
|
General purpose |
Yes |
|
Clean |
Yes |
|
Non-coating |
Yes |
|
Low viscosity |
Yes |
|
Low temperature |
Yes |
|
Med. temperature |
Yes |
|
Low velocity |
Yes |
|
High velocity |
Yes |
|
Short sensor |
Option |
|
Long sensor |
Option |
|
PP/Ryton sensor |
Option |
|
PVDF sensor |
Option |
|
Relay |
Option |
|
FET |
Option |
|
Intrinsically safe |
No |
|
Coating |
No |
|
Bubbles |
No |
|
Temperature |
No |
|
High temperature |
No |
|
Medium viscosity |
No |
|
High viscosity |
No |
|
|
|
