|
LC52-1001 |
 |
|
|
|
|
|
|
Application |
| For single tank relay control and indication, package the continuous relay controller with any of our level transmitters. The general purpose DIN controller is commonly used for the automatic filling or emptying of a tank between two set points with an additional high or low level alarm set point.
A single latched relay performs the automatic pump or valve control, while a second relay provides an independent alarm. With a built-in power supply and analog repeater, the continuous relay controller offers a complete solution for single tank automation. |
|
|
|
Specifications |
| Supply voltage: |
120/240 VAC @ 50-60 Hz. |
| Consumption: |
5 watts max. |
| Display type: |
LED, 3.5-digit |
| Display units: |
Engineering |
| LED bar graph: |
Span and set points |
| LED indication: |
Power and relay status |
| LED sensor alarm: |
<4 mA = amber >20 mA = red |
| Calibration: |
Digital, push button |
| Memory: |
Non-volatile |
| Security: |
Set point lock out |
| Sensor input: |
(1) two or three-wire
4-20 mA transmitter |
| Sensor supply: |
28 VDC @ 5 watts |
| Loop power: |
4-20 mA, 24 VDC |
| Repeater output: |
4-20 mA, 12-36 VDC |
| Contact type: |
(2) SPDT relays, (one latching) |
| Contact rating: |
250 VAC @ 10A |
| Contact latch: |
Selectable ON/OFF |
| Contact delay: |
0-60 seconds |
| Electronics temp.: |
F: -40° to 158°
C: -40° to 70° |
| Enclosure type: |
35 mm DIN rail |
| Encl. material: |
PP, UL94VO |
| Classification: |
General purpose |
| CE compliance: |
EN 50082-2 immunity
EN 55011 emission
EN 61010-1 safety |
|
|
Click here to download above specifications in a PDF file format. |
|
|
|
|
|
Technology |
| Not applicable for controllers |
|
|
