Switch-Pro,Compact,Relay Controller,Flow Switch,Flowline

Switch-Pro™ with Compact Relay Controller Flow Switch
From Flowline


  Process Controls Home
 
  Pumps
  Chemical Resistance
  Chlorine Systems
  Filtration
  Flow
  Hand Held Meters
  Level
  Mixers & Stirrers
  Monitors/Controllers
  Polyethylene Tanks
  Pulsation Dampeners
  Valves & Accessories
  Weighing Systems
  Weighing Systems
  Manufacturers
 
  Links
 
Switch-Pro™ with Compact Relay Controller Flow Switch
A_1_-_6_ _
 
 
Application
This general purpose liquid or gas flow switch package provides a complete solution for low flow pump or process protection with a 10A compact relay controller for actuation. The short sensor is intended for use in pipe or ducting from 1/2 inch to 1 1/2 inch; the long sensor is applied from 2 inches up. Each assembly includes a compact relay controller and flow switch. To complete your product, select the appropriate liquid or gas sensor configuration, sensor length and material for your application. Optional flash alarm brings immediate attention to low flow conditions.
Specifications
Set point range: AT1_: 0.04 to 3 fps
(0.012 to 0.91 mps)
AG1_: 1 to 90 fps (0.3 to 27 mps)
Factory set point: AT1_: 0.2 fps (0.06 mps)
AG1_: 10 fps (3 mps)
Repeatability: ±.5% of set point
Response time: 1-10 seconds
Set point adjust.: Potentiometer
Viscosity range: AT1_: 1-200 centipoise
AG1_: N/A
Supply voltage: 120/240 VAC @ 50-60 Hz.
Contact type: (1) SPDT relay
Contact rating: 250 VAC @ 10A
Contact delay: 0-60 seconds
LED indication: Power, relay and sensor status
Strobe type: _61_: Xenon tube
_62_: N/A
Strobe flash: _61_: 1 per second
_62_: N/A
Process temp.: F: 32° to 140°
C: 0° to 60°
Electronics temp.: F: -40° to 140°
C: -40° to 60°
Pressure: 150 psi (10 bar) @ 25° C.,
derated @ 1.667 psi (0.113 bar)
per ÝC. above 25° C.
Wetted material: 16__: PP-Ryton®
36__: PVDF Kynar®
Process mount: 3/4" NPT (3/4" G)
Mount. gasket: Viton® (G version only)
Enclosure rating: NEMA 4X (IP65)
Encl. material: _61_: PP, UL94VO and polycarbonate
_62_: PP, UL94VO
Conduit entrance: Single, 1/2" NPT
Classification: General purpose
CE compliance: EN 50082-2 immunity
EN 55011 emission
EN 61010-1 safety
 
Technology
LIQUID
General purpose Yes
Clean Yes
Non-coating Yes
Low viscosity Yes
Low temperature Yes
Med. temperature Yes
Low velocity Yes
High velocity Yes
Relay Yes
Short sensor Option
Long sensor Option
PP/Ryton sensor Option
PVDF sensor Option
Intrinsically safe No
Coating No
Bubbles No
Temperature No
High temperature No
Medium viscosity No
High viscosity No


GAS
General purpose Yes
Non-coating Yes
Low temperature Yes
Med. temperature Yes
Low velocity Yes
High velocity Yes
Relay Yes
Short sensor Option
Long sensor Option
PP/Ryton sensor Option
PVDF sensor Option
Intrinsically safe No
Coating No
High temperature No
Temperature No


Site Designed By Panther Marketing & Design