The NEMO® SY
Progressing Cavity Pump is used for demanding applications
in every branch of industry around the globe. In bearing
block design with free shaft extension, this pump can be
run with any type of drive, such as servo motors, diesel
motors or hydraulic drives. The pump can also handle high-pressure
applications. Four rotor/stator geometries are available,
enabling the pump to be customized perfectly to your application
case. The NEMO® SY is suitable
for all branches of industry where low- to mid- viscosity
and/or shear-sensitive, abrasive or adhesive media must
be safely and gently conveyed.
Features
of the NEMO® SY Progressing
Cavity Pump
-
continuous low-pulsation conveyance unaffected by
fluctuations in pressure and viscosity
-
conveyance volume in proportion to rotation speed
with high dosing precision over a broad rotational-speed
range
-
high pressure capability without valves
-
mechanical seal is located at the front of the product
flow, making flushing unnecessary in many applications.
-
flange bearing separate from foot, making stator
replacement easy
The NEMO®
SY Progressing Cavity Pump offers you:
-
conveying pressure up to 72 bar
-
gentle product conveyance
-
pump connections in accordance with national and
international standards, as well as in specially designed
models
-
easy serviceability
Advantages
of the NEMO® SY Progressing
Cavity Pump
-
variable modular system
-
various rotor/stator geometries and a large spectrum
of materials
-
the right joint for any application
-
standard mechanical seal, other seals optional
Everything
from a single supplier
For the most varied of applications in your processes,
it is now possible to procure the NEMO®
Progressing Cavity Pumps together with the well-known
NETZSCH TORNADO® Industrial
Rotary Lobe Pumps.
Take advantage of our decades of experience and know-how
in the manufacturing of positive-displacement pumps.
1 Rotor
In wear- and corrosion-resistant designs including the wear-free
ceramic rotor NEMO CERATEC®.
2 Stator
Vulcanized into the tube with sealing on both sides in a
variety of elastomers, plastics and metals. Stator inlet
with funnel-shaped opening for improved feed of the product
into the conveying chamber.
3 Drive Chain
Coupling rod and two gimbal joints for the transmission
of power from the drive to the rotor.
4 Shaft Seals
Standard with single-acting, bi-directional, wear-resistant
mechanical seal. Upon request, with single- or double-acting
mechanical seals of varied designs and from various manufacturers,
cartridge and special seals as well as packed glands.
5 Suction and Discharge Housing
Flange and threaded connections in accordance with DIN and
international standards. Materials in cast iron, steel,
chrome-nickel-steel rubberized; also special materials upon
request.
6 Bearing Block with Free Shaft Extension
Large double bearing ensures a high level of shaft stability
and thereby ideal conditions for a great variety of mechanical
seals. The free shaft extension makes it possible to use
any drive type including diesel and hydraulic drives.
The
NETZSCH NEMO® SY Progressing
Cavity Pump is available:
-
in various sizes for flow rates up to 500 m3/h
-
for differential pressures up to 48 bar
-
in various materials, from steel to chrome-nickel-steel
to highly acid-resistant materials such as duplex,
Hastelloy and titanium
-
with various stator elastomers, from highly abrasion-resistant
natural rubber, to oil-, acid-, and alkali-resistant
elastomers, to Aflas and Viton.
-
in S & L Geometry for optimal adjustment to the application
-
with a variety of mechanical shaft seals and packed
glands as well as special seals
...and conveys
-
substances with consistencies from runny to pasty,
with or without solid content.
-
substances with consistencies from slowly flowing
to non-free-flowing, with or without solid content
Progressing
Cavity Pumps
