1/32 DIN Fuzzy Logic Controllers 

Temperature/Process Controller Controlling Temperature, Humidity, Pressure, 
Flow, PH, Detecting Voltage, Current, Power, Phase failure.

• PID - FUZZY or ON/OFF control	• Heater Saver power limit function
• Heatlng/Coollng + 2 Alarms	• Multiple alarms on a single output
• Field input selection TC, RTD, Linear	• Scalable linear input
• Outputs Relay, Pulsed DC, 4 - 20 mAmps	• Rapid Cycling controls faster systems
• Dual display red / green + LED% output	• Customized operator Interface
• Self tuning with inhibited overshoot	• Set Point Range limit
• Low Panel depth 31/8" (80 mm)	• Plug in from front
• 16 Ramp/Dwell Segments option	• Operator Lockout Security setting

Fuzzy Logic is an artificial intelligence technigue that can make decisions based on vague or incomplete information. This type of control provides perfect control results. Though the basis is precise microprocessor technology, fuzzy logic uses linguistic descriptions to define input correlations and expected outcomes. The result of fizzzy logic is that initial overshoot and excursions from the set point due to process disturbances are iliminated. The process can be controlled with minimum or no temperature variations.

Specifications:  

Power supply	AC 85 to 265 Volts 50/60 Hz
Power consumption	About 4 VA
Memory element	EPROM 10 Years Data Retention
Display accuracy	Within 0.2% of Displayed Value + 1 Digit
Sampling time	250 ms
Isolation	Input to output Separate Isolation
Dielectric	1000 V AC 1 Min
Isolation resistance	DC 5OO V < lO M ohm
Operating temperature	14 to 122 Deg F
Humidity range	0 to 90 % RH Non Consuming

FUZYPRO ORDERING INFORMATION

PART #:    A   B   C   D   E   F   G
EXAMPLE:   F16 1   0   1   2   0   0

A: Model   F 16=1/16 DIN 48 mm X 48 mm PID/Fuzzy Control
           F 18=1/8 DIN 48 mm X 96 mm PID/Fuzzy Control
           F 14=1/4 DIN 96 mm X 96 mm PID/Fuzzy Control
           F 16P =1/16 DIN 48 mm X 48 mm PID/Fuzzy Control 8 or 16 Steps programmable
           F 18P =1/8 DIN 48 mm X 96 mm PID/Fuzzy Control 8 or 16 Steps programmable
           F 14P =1/4 DIN 96 mm X 96 mm PID/Fuzzy Control 8 or 16 Steps programmable
B: Output 1 control output type
  O - None
  1 - Relay contact, SPST 3A/240 VAC
  2 - 3 to 32 DC voltage pulse, 20 VDC/20 mA
  3 - Current, 4-20 mA
  4 - SSR Output 1.1 Amp 240 Volts
C: Out 2 control output type
  0 - None
  1 - Relay Contact, SPST 3A/240 VAC
  2 - 3 to 32 DC voltage pulse, 20 VDC/20 mA
  3 - Current, 4-20 mA
  4 - SSR Output 1.1 Amp 240 Volts

D: Alarms
0 - None
1 - One alarm Relay 3A 240 volts SPST
2 - Two Alarm Relays 3A 240 Volts SPST
3 - Three Alarms only available with single control Output or F14
E: Transmitter
          0 - None
          1 - 0-20 mA (adjustable)
          2 -12 volts DC output Transducer power supply
F: Second Input
  O - None
  1 - 4 - 20 mAmps remote Setpoint
  2 - 0 to 20 mAmps remote Setpoint
  3 - Heater Break Alarm