Features:
• Microprocessor
based controllers
•
Automatic tuning PID Control
• Touch pad front panel controls
•
Soft start ramp up standard feature
• Auto or manual mode available thermocouple status indicator
• Current indication setpoint or process indication
•
Under/over temperature indication
The hot runner control modules
are fully automatic PID controllers with on board diagnostics
for Open, Shorted, or Reversed thermocouple. They also feature
LED's for under Temperature or over temperature indication, Heat
load on off, Ramp start, and Open or closed loop operation. The
display can also be set for set point or process temperature indication
and a +/- 3 degree indicator flashes when process temperature
is within 3 degrees of setpoint. these modules are also designed
for full communication capability with alarm and standby module.
Specifications:
Voltage. . . . . . . . . . . . . .
.120 or 240 volts
Output Current/ Watts. . . . .15 amps 3600 watts at 240 1800 at
120
Input. . . . . . . . . . . . . . . . Type J thermocouple Grounded
or ungrounded
T/C Break protection. . . . . . Inhibits power to heater
Control Accuracy. . . . . . . . +/-1ºF or +/- .5ºC
Temperature Range. . . . . . .Ambient to 999ºF (535ºC)
Cycle time. . . . . . . . . . . . .0.33 seconds
Manual control. . . . . . . . . .Adjustable from 0 to 100%
Ramp Start. . . . . . . . . . . . Duration 5 minutes
Output. . . . . . . . . . . . . . . Zero cross triac triggering
Data Communication. . . . . . IBM PC compatible
Compatibility. . . . . . . . . . . Hot runner industrial standard
compatible
Accessories. . . . . . . 600 to 240 volts step down transformers
Power connectors 5, 8,12, zones
Thermocouple connectors 5, 8,12 zones
Floor Stands will support upto 48 zones
Main Frames 5, 8,12, Stackable to 48 zones
