Pressure Transducers

Pressure Transducers are to measure pressure up to 20,000 PSI. These Pressure Transducers are available  with a variety of outputs like 0 - 5 Volts, 4-20 mAmps,1 to 6 VDC 0.1 to 5.1 VDC or millivolts. Measurements can be made in Gage, absolute, Barometric, Differential, compound or vacuum. The Pressure Transducers are available in accuracies ranging from 0.05% full scale to 1 % full scale  and are ideal for most applications where pressure needs to be measured or controlled. These units are capable of operating in harsh environments and can handle over pressures upto 3 times their rated pressure. Heavy industrial construction make them shock and vibration resistant, and readily available with NEMA 4 or explosion proof housings. The Pressure Transducers can be used in Hazardous locations, R & D Laboratories, Vacuum Systems etc.

Specifications and Design Applications

Pressure Ranges. . . . . . . . . 0 to 25, 50,100,1000, 3000, 5000,10,000, 20,000 
PSI Accuracy. . . . . . . . . . .0.03 to 1 % of full Scale per model 
Electrical Connection. . . . . . Conduit, Pigtail, or Terminal Strip
Output Signal. . . . . . . . . . Voltage, Millivolts, Current, Digital (RS-232) 
Type of Measurement. . . . . . . Barometric Gage, Vacuum, Absolute Differential 
Temperature Range. . . . . . . . 0 to 250 degrees Normal. High 750 degrees F 
Types of housing. . . . . . . . .General Purpose, NEMA 4, Explosion proof/FM       
                                 Intrinsically safe, Sanitary/High Purity 
Adjustment. . . . . . . . . . . .Zero and span External or internal per model 
Media Compatibility. . . . . . . Gas, Liquid, Corrosive Liquids/gases, Wet/dry Air,
                                 Inert gases,