Programmable Temperature Controllers

• Advanced ramp and soak

The Programmable Temperature Controller is a microprocessor based program controller which stores a maximum of 256 segments in 16 patterns (16 segments per pattern ). It is compact 96 mm (4" ) Square DIN size unit that features a unique touch key panel which allows the display section of the front panel to be used not only for setting but also for data entry.

Specifications

INPUT
Thermocouple. . . . . . .Type J,K,T,E,B,R,S,N. (selectable)
RTD. . . . . . . . . . . PT 100 ohm(DIN or JIS)
Linear. . . . . . . . . .-10-60mV Configurable input other voltage or current.
Display. . . . . . . . . in temperature or engineering units
OUTPUTS. . . . . . . . . Single output with 2 optional independant alarms
                         Heating and/or cooling outputs with 2 optional alarms
Relay. . . . . . . . . . SPST relay rated 3A, 240V maximum resistive load
Pulsed Voltage. . . . . .32VDC, 20mA maximum ohms
Current. . . . . . . . . 4-20mA, 0-20mA maximum load 500 ohms
Voltage. . . . . . . . . 0-10V minimum load 500K ohms
Alarms. . . . . . . . . .8 selectable modes each alarm
                         SPST relay(s) rated 2A, 240V maximum resistive load.
CONTROL FEATURES
Temp Range. . . . . . . .Selectable Set Point: -1999-3182F/-1128-1750C
Alarm Set Point. . . . . Full Range Adjustable
Control Modes. . . . . . Controls can be configured as On/Off Proportional(P)
                         Proportional with manual reset
                         Proportional/Integral(PI) Proportional Derivative(PD)
                         Proportional/Integral/Derivative(PID)
                         Heating and Cooling Proportional Band:O-100% of span
Integral(Reset). . . . . 0-3600 seconds
Derivative(Rate). . . . .0-1000 seconds
Anti-Reset Wind-up. . . .Inhibits integral action outside of proportional band.
Cooling. . . . . . . . . Adjustable deadband from-10 to + 10% of cooling proportional band
Manual Mode. . . . . . . Configurable as open loop control should sensor no longer function
Cycle Time. . . . . . . .0-120 seconds
Sensor Break Protection. Configurable status of control and alarms
Control Action. . . . . .Selectable-Direct action for cooling Reverse action for heating
INDICATION
Display. . . . . . . . . 4 digit red 5/8" LED Process Value Display.
                         Green 1.2" LED Set Value display
Selectable decimal placement for normal or high resolution display
Example. . . . . . . . . . . 0000, 000.0, 00.00 or 0.000
F/C. . . . . . . . . . . . . Selectable with 2 LED indicators
Sample Rate. . . . . . . . . 250 milliseconds
Data Retention. :. . . . . . l0years(EEPROM)
Control Stability. . . . . . + - 0.15% of full scale
Accuracy. . . . . . . . . . .+ -0.25% of range: + ·-1 c or 0.5C in high resolution
Cold Junction Compensation. .0.1 % ambient
External Resistance. . . . . 100 ohms maximum
Common Mode Rejection. . . . 120dB
Normal Mode Rejection. . . . 60dB
Input Impedance. . . . . . . 10M ohms
Operating Temperature. . . . 14-122F-10-50C
Humidity. . . . . . . . . . .0-90% RH(non-condensing)
Insulation. . . . . . . . . .20M ohm minimum (5OOVDC)
Breakdown. . . . . . . . . . 2OOVAC,5O/60Hz 1 minute
Vibration. . . . . . . . . . 10-55Hz amplitude 1 mm
Shock. . . . . . . . . . . . 200m/c(20g)