|
| |
 |
|
The
Multidyne Corona Treatment System
from 3DT is the perfect solution to
adhesion problems on injection, blow
molded or extruded parts. A Multidyne
Corona Treatment System can be incorporated
into existing or new production lines
or operated manually. Treatment is
done prior to printing, glueing or
laminating. The Multidyne Treatment
Systems have a durable, one-piece
ceramic head. This makes the Multidyne
suitable for a wide variety of applications,
even when treating areas near metal
inserts.
The treatment of Multidyne's Corona
discharge is created with the use
of the "short circuit" principle
generated between two hook-formed
electrodes at a high voltage potential.
An air stream passes between the electrodes
spreading the Corona field uniformly
onto the surface receiving treatment.
|
This
design makes Multidyne Corona Treatment System
perfect for a wide variety of applications.
Treatment on surfaces adjacent to metal inserts
or areas held in a metal fixture is easily
accomplished with the Multidyne system.
Each Multidyne Corona Treatment System is
furnished as a complete set of components
including generator, transformer and one or
two treating heads. For treatment of large
complex areas such as containers and bottles,
multi-headed systems are available with 4,
6, 8 or 10 heads.
Standard treating heads deliver treatment
to unlimited lengths of material with widths
of up to 2.5" (65mm). Flat surfaces and
complex 3-dimensional parts alike are treatable
with the flexibility of the Multidyne system.
A compact and durable aluminum cabinet houses
both generator and transformer. The treating
head connects securely to the cabinet via
a high voltage cable and air hose.
The solid state controlled generator has a
built-in treating timer that is activated
and adjusted on the front panel. This custom
designed and manufactured generator supplies
power to the high voltage transformer when
then directly supplies the treating head resulting
in low frequency Corona discharge.
|
Products
