|
 Tip
Lifts® provide a faster, safer, easier method of roll handing
and are available in three models: L1, L2 and L3.
The spring loaded Tip Lift® probe is easily inserted into the
center core of the material. Four gravity activated teeth on the
probe's end, grip the core firmly.
This patented method assures the load cannot be disengaged from
the probe while the load is suspended in air. This is an important
safety feature. Once the probe is inserted in the roll, the load
is tipped, lifted and moved to wherever it is needed. Once the
roll material is moved to the space required, it can be easily
lowered into position. Then, with just a squeeze of the handle
grip, the probe's grip on the core is released. All controls are
operated by a finger controlled push button, making for ease of
operation. Tip Lift® can grip vertical and horizontal rolls with
equal control.
(Note: cannot be released when load is suspended in air.)
Using a C-clamp, clamp trucks, slings, chain hoists, or just plain
manhandling rolls, you've probably experienced damage to your
rolls, delay in moving rolls, and even serious injuries.
The patented Tilt-Lock Tip-Lift Roll Handling Systems provides
remarkable finger tip control. Without automatic controls,
everything stays level, horizontal and under control.
Can lift any type of roll from stack, turn it in any direction,
and ease it onto a press or some other piece of equipment.
Air
Tip Lift®
•
Ideal for low headroom applications
• Less maintenance required
• Faster turning time
• Four gravity activated teeth grip the core firmly
• Pendant is air controlled (80 p.s.i.)
• No electric power required
• Probes are interchangeable
|
|
Electric
Tip Lift®
•
115 V AC-powered
• Low headroom models available
• Simply push a button to turn material 90 degrees
• Four gravity activated teeth grip the core firmly
• Probes are interchangeable
|
|
Manual
Tip Lift®
•
Designed to be used in lieu of a center lift for tipping
rolls from horizontal to vertical (Contact factory for
vertical to horizontal applications)
• Pneumatic tooth release (optional)
• Four gravity activated teeth grip the core firmly
• Probes are interchangeable
|
|
For more information on Tilt-Lock Roll Handling Systems
|
Products
