Air Jets Blow Off System

Don't buy another compressor...change over to ARTX™ Air Jets Blow Off System...cut noise and energy too!

Heavy blow-off and air conveying jobs can overwork your compressor and shorten the time between expensive overhauls. A 1/4" (6mm) air tube uses the entire output of a 10-hp compressor, sending energy costs out of sight, hitting 100 dBA noise levels, and violating OSHA dead-end air pressure limits. Air Jets Blow Off System gives you an edge with air amplification. Safer and quieter, they amplify compressed air flows four times, delivering high thrust with a fraction of the air used by open air lines. Plant-wide changeover to ARTX Air Jets Blow Off System is like adding compressor capacity. They'll:

cut your energy bill
increase air flow with lower noise level
reduce demand on your compressor
give you a return on investment in weeks, if not days.

How do High-Thrust Air Jets Blow Off System work?

Air Jets Blow Off System High-Thrust Jets release a tiny amount of compressed air at near-sonic velocity through a fine, internal, ring-shaped nozzle. The high-speed "tube" of air ejected through the front creates a strong vacuum behind itself, pulling additional surrounding air through the rear of the jet, while pushing the ambient air in front.

Two models of Air Jets Blow Off System: adjustable unit for easy set-up, with air conveying capability

Our Adjustable High-Thrust Air Jets Blow Off System simplifies set-up or system change because you can alter the flow and thrust with a quick twist of the nozzle. Just install it on your air line and set it to do the job.

The In-Line Air Jets Blow Off System are ideal for retrofitting open air line blowoff applications where system set-up does not change frequently. It can also air convey fine granular product, with a 3/4" (19mm) diameter inlet for attachment of tubing. It develops 54" W.C. suction and 5.6 oz. (150 gm) thrust with 80 PSIG (5 BAR) air.