DEFOAMER
WB 500
Water Based
Defoamers, superior nonpolluting that controls all types of
foam in sewage aerators, digesters, scum blankets, cooling
towers, industrial cleaning operations, pulp & paper production,
and other applications where defoaming is a problem.
Provides awesome
de-foaming in all applications including extreme acid or alkaline
pH conditions, and all foam types with complete environmental
safety.
Sewage
Plants
For long-term foam control in activated sludge plant aeration
tanks, digesters, sewage entry, or effluent lines. This low
viscosity formulation does not require pre-dilution to achieve
complete and rapid foam control.
Attach a small valve to the small bung of the Defoamer WB
500 Water Based Defoamers drum and run a small tubing to the
entry fume of the aeration tank or area where foaming of waste
occurs.
Drip 1 quart to 1 gallon of Defoamer WB 500 Water Based Defoamers
per 10,000 gallons of waste (25-100 PPM) to stop foaming and
allow the aerators and digesters to function at maximum capacity
and efficiency. For immediate foam relief, overspray the area
with a diluted solution (1-10) of the anti-foam.
Industrial
Cleaning & Waste Defoaming
Spray or drip small
amounts of Defoamer WB 500 Water Based Defoamers (100-200
PPM) into the water-based system where foam must be controlled
or eliminated.
Defoamer WB 500 Water Based Defoamers do not effect paper
processing, cleaning, cooling tower, or industrial processes.
For quick foam knockdown, spray foam with a diluted solution
of the Defoamer.
FOR
INDUSTRIAL USE ONLY
CAUTION:
Keep out of reach of children. Mild eye irritant. Wash from
eyes with water until irritation stops. Prolonged contact
can irritate skin. Wash from skin with soap and water. Ingestion
in quantity can cause severe diarrhea. Treat as soap ingestion.
Products