|
The 10A Thermal Mass
Flow Meter
 Thermal
Mass Flow Meter Fox Model 10A incorporates mass thermal flow technology
that operates on the law that fluids absorb heat. A heated sensor
placed in the gas stream transfers heat to the gas in proportion
to the mass flow rate. Using a bridge circuit, one sensor detects
the gas temperature; a second sensor is maintained at a constant
temperature above the gas temperature. The temperature difference
results in a power demand that equals the gas mass flow rate.
This circuit maintains accurate flow measurement over large temperature
and pressure ranges. The Thermal Mass Flow Meter Fox Model 10A
can be installed in hazardous areas and is FM and CSA approved.
Thermal Mass Flow
Meter Fox Model 10A offers these unique features:
- A direct mass flow measurement
of gases in SCFM or other units. No pressure or temperature
compensation required.
- Accurate flow measurement
over a wide range. 100:1 typical.
- Easy, cost effective installation.
- Safe in explosive gas applications.
FM and CSA approved.
- No moving parts and extremely
low pressure drop.
Common gases:
Air, ammonia, biogas, butane, chlorine, compressed air, carbon
monoxide, carbon dioxide, digester gas, ethane, ethylene, helium,
hydrogen, methane, natural gas, nitrogen, oxygen, and propane.
Common Applications
Compressed air
Natural gas to boilers
Wastewater aeration
Hydrogen monitoring
Land fill vapor
Purge monitoring
Flare headers
Exhaust gas
Datasheets
Thermal
Mass Flow Meter Fox Model 10A datasheet. (310K)
Application
Guides
APP
Guide - Thermal Mass Flow Meter Advantages (67K)
APP
Guide - Thermal Mass Flow Meter For Natural Gas (95K)
APP
Guide - Fox VS Vortex (74K)
Application
Data sheet
10A
ADS 6 (60K)
10A
Display Configuration Codes 2A (135K)
|
Products