MultiTherm,Heat,Transfer,Fluids

MultiTherm Heat Transfer Fluids

Process Controls Home
Site Navigation
New Articles
Products

Heat Transfer Flushing Fluid
MultiTherm FF-1®

  • Specially formulated flushing fluid to clean out systems during:
    - Start-ups - to remove loose material such as weld splatter, fines, particulate matter, etc. left in lines and equipment, along with oil and some preservative coatings
    - General Maintenance - for removing particulate matter and used heat transfer fluid from a system prior to recharge or changeover from one fluid to another.
  • Compatible with all MultiTherm and mineral oil heat transfer fluids.
  • Thermal expansion coefficient 0.00047/°F (0.00085/°C)

High Temperature Applications
MultiTherm PG-1®

  • Operating range from 10°F (-12°C) to 600°F (315°C)
  • Food grade (NSF registered, FDA certified Non-Toxic, USDA
  • Chemicallyacceptable, Kosher certified)
  • Low viscosity / Low pour point
  • Non-Toxic, Non-Hazardous, Non-Fouling
  • Designed for applications in Food, Chemical, Plastics, and Die-Casting
  • Thermal expansion coefficient 0.00035/°F (0.00063/°C)
  • For use in closed loop, liquid phase heating and cooling systems to 600°F
  • Operating range from 10°F (-12°C) to 600°F (315°C)
  • Highly refined to have High flash point
  • Oxidation resistance - Very Low vapor pressure
  • Non-Toxic, Non-Hazardous
  • Designed for applications in Asphalt, Chemical, Plastics, Laundries and Die-Casting
  • Thermal expansion coefficient 0.00054/°F (0.00097/°C)
  • For use in closed loop, liquid phase heating systems up to 600°F
  • MultiTherm IG-4 is an upgrade of, and a direct replacement for MultiTherm IG-2®
  • Operating range from 10°F (-12°C) to 550°F (288°C)
  • Economical heat transfer fluid
  • High flash point
  • Non-Toxic, Non-Hazardous
  • Designed for applications in Asphalt, Roofing, Paper, Particle Board and Die-Casting
  • Thermal expansion coefficient 0.00054/°F (0.00098/°C)
  • Operating range from 10°F (-12°C) to 550°F (288°C)
  • Economical heat transfer fluid
  • High flash point
  • Non-Toxic, Non-Hazardous
  • Designed for applications in Asphalt, Roofing, Paper, Particle Board and Die-Casting
  • Thermal expansion coefficient 0.00054/°F (0.00098/°C)

MultiTherm 503®

  • When you have heating and cooling in the same loop
  • Operation range: from 50°F (-10°C) to 500°F (260°C)
  • Meets FDA specifications but not certified
  • Very low viscosity - Very low pour point - Low vapor pressure
  • Relatively high flash point - Non-Toxic, Non-Hazardous
  • Designed for applications in Plastics, Chemical, and other processing industries
  • Thermal expansion coefficient 0.00051/°F (0.00092/°C)
  • For use in closed loop, liquid phase heating and cooling systems from 10°F to 500°F

Low Temperature Applications
MultiTherm ULT-170®

  • For ultra low temperature applications
  • Operation range down to -170°F (-112°C)
  • Low freezing point - Low viscosity at ultra-low temperatures
  • Thermally stable & biodegradable
  • Single fluid usage for sterilization applications
  • Designed for Pharmaceutical, Chemical, Freeze-Drying, and Cryogenic applications
  • Extends low-end operating ranges far beyond the boundaries of most competitive brands
  • Remains pumpable even at temperatures below -170°F (-112°C)
  • For mid to low temperature range applications
  • Operation range down to -112°F (-80°C)
  • High flash point - Non-Toxic
  • Designed for Food & Beverage, Pharmaceutical, and refrigeration applications
  • Used when heat transfer fluid requirements demand both low toxicity and an elevated flash point
  • Aqueous-based for Low temperature applications
  • Operation range down to -58°F (-50°C)
  • Non-toxic, None-flammable
  • Designed for Ice Rink, Food, Refrigeration, Breweries/Distilleries, and HVAC applications
  • Engineered to deliver the desirable low-end temperature performance of synthetic organic and silicone-based fluids

Site Designed By Panther Marketing & Design