Ultrasonic Transducers/Generator from Finnsonic

Ultrasonic generator converts the net frequency into high frequency signal. A combination of FinnSonic generator and transducer offers the best performance in industrial ultrasonic cleaning.

FinnSonic FSG-482 is a high power ultrasonic generator with adjustable wave characteristics and digital snap-in panel. This technically advanced easy-to-use generator suits well applications requiring consistent high power, like degreasing in surface treatment lines. It's multiple adjustable parameters help to optimize the ultrasonics into your specific application. It's unique Power Booster gives additional boost for tough cleaning applications.

Features:

• 4,8 kW 30 kHz ultrasonic power in single unit
• Frequency Sweep
• Power Control
• Power Booster
• Degassing
• Auto tuning
• I/O interface
• Cabinet mounting
• Digital snap-in panel with
  • Power, frequency, sweep and booster settings and controls
  • Current and temperature monitoring
  • Operating hour counter
  • Malfunction protection and indications incl. low and high voltage, overload or short circuit, phase fault, generator overtemperature

FinnSonic FSG-121 is a reliable medium power ultrasonic generator with Power Booster and Frequency Sweep.

It's unique Power Booster gives additional boost for tough cleaning applications. FinnSonic FSG-121 is available in 30 kHz or 40 kHz frequency.

Features:

• 1,2 kW nominal ultrasonic power
• Available in 30 kHz or 40 kHz frequency
• Cabinet mounting
• Power, Sweep and Booster controls with outer signals
• Protection and automatic reset against short circuit, overcurrent, low voltage and overtemperature.

Ultrasonic Immersible Transducers

Ultrasonic transducers converts the high frequency electric energy from the ultrasonic generator into mechanical vibration. A combination of FinnSonic generator and transducer offers the best performance in industrial ultrasonic cleaning. FinnSonic offers a full range of standard ultrasonic immersible transducers and a wide variety of mounting types. All the transducers are available in 30 kHz and 40 kHz frequencies. The piezoceramic transducer elements are bonded to hermetically sealed stainless steel AIS316L boxes. PZT elements are of sandwich construction. The transducers can be used in new cleaning installations or retrofitted into existing systems to enhance the cleaning effect. We are pleased to help you in optimizing an ultrasonic system for your particular needs. Please do not hesitate to ask for our custom size transducers should none of the standard transducers below suit your specific application.

Ultrasonic Transducers

Ultrasonic immersible transducers for new cleaning installations or existing cleaning systems. A wide variety of standard sizes and mounting types.

Technical Info

Nominal power (Watts)	No. of piezo elements	Nominal frequency (kHz)	Length (mm)	Width (mm)	Depth (mm)	Type code
300	6	30	260	200	90	FSB300/30-26x20…
300	6	30	355	150	90	FSB300/30-35x15…
600	12	30	310	300	90	FSB600/30-31x30…
600	12	30	355	250	90	FSB600/30-35x25…
600	12	30	450	200	90	FSB600/30-45x20…
600	12	30	645	150	90	FSB600/30-64x15…
1200	24	30	620	300	90	FSB1200/30-62x30…
1200	24	30	710	250	90	FSB1200/30-71x25…
1200	24	30	900	200	90	FSB1200/30-90x20…
1200	24	30	1200	150	90	FSB1200/30-120x15…

All transducers available also as 40 kHz versions.
Other immersible box sizes on request.

2. Mounting types

Technical Info

The fixing system and cabling are on transducer short side in mounting types C - H. On request it can be also on the long side.