| |
PDF
|
Model
|
Description
|
|
|
|
|
Single
Phase Current Monitor
A single set-point sensor that
can be used as either an over current or under current
sensor, depending on the contacts used.
|
|
|
|
|
AC
Current Transducer
Designed to accept an AC current
input, and provide a proportional DC output.
|
|
|
|
|
DC
Current Monitor
This monitor senses from 1 to
10 amps DC, and is available for 24 or 120 VAC, 40 or
60 Hz supply voltages. |
|
|
|
|
Current
Transmitter/Receiver
Consists of two identical modules.
One module accepts the input from a standard CT, while
the second module is connected to a current monitor.
|
|
|
|
|
AC
Current Monitor
Used to detect either over current
or under current, depending on whether the set-point
is set above or below the input current. |
|
|
|
|
AC
Current Monitor
The Model 1732 generates its
operating voltage from the monitored current line, so
no external power supply is required. |
|
|
|
|
3-Phase
Current Unbalance Detector
Monitors 3-phase lines to detect
an unbalanced current. |
|
|
|
|
Current
Sensitive Relay
Monitors a single-phase AC current
for an over-current condition. |
|
|
|
|
3-Phase
Current Monitor
Designed to monitor all legs
of a 3-phase line, and can also be used to monitor three
individual single-phase lines. |
|
|
|
|
Motor
Load Monitor
Detects an overload or under-load
condition on all types of running motors; conveyor motors,
elevator motors, mixer motors, submersible pumps, suction
pumps, etc. |
|
|
|
|
Current
Unbalance Detector
Designed to monitor 3-phase AC
current (or compare three single-phase AC currents).
|
|
|
|
|
Single
Phase Current Monitor
Designed to continuously monitor
single-phase AC current. |
|
|
|
|
3-Phase
Over/Under Current Monitor
Designed to monitor the current
level of a 3-phase line or to compare the currents of
three single-phase lines. |
|
|
|
|
Single
Phase Current Monitor
Designed for monitoring alternating
current in the range of 1-5 amps, at 50 to 400 Hz.
|
