Hart Scientific Portable Infrared Calibrator Model 9132
|
Accurate Hart Scientific portable infrared calibrators feature a large, temperature controlled blackbody target with a diameter of 2.25" (57 mm), which offers a large field of view area for optical variations in infrared thermometers. The emissivity of the isothermal target is set at 0.95 (±0.02%), and the target temperature can be controlled in set-point increments of 0.1° from -30° to 500°C (-22°F to 932°F). For even higher precision, a well is located directly behind the Hart Scientific portable infrared calibrator's blackbody surface for contact calibration of the blackbody. Hart Scientific portable infrared calibrators are as easy to use as "point and shoot." Simply set the desired blackbody temperature from the convenient front panel control buttons, wait a few minutes for equilibrium, and point the gun at the target. The radiated energy from the blackbody is measured by your IR thermometer. Simply compare its reading to the display on the Hart Scientific portable infrared calibrator and record the difference. Hart Scientific Model 9132 Portable Infrared Calibrator For IR calibrations above normal ambient, the Hart Scientific Model 9132 portable infrared calibrator provides a stable blackbody target up to 500°C (932°F). With accuracy to ±0.5°C and stability to ±0.1°C, the Hart Scientific Model 9132 portable infrared calibrator can certify most handheld pyrometers. Hart Scientific Model 9133 Portable Infrared Calibrator If you're calibrating IR guns at cold temperatures, you'll love the Hart Scientific Model 9133 portable infrared calibrator. With solid-state cooling technology, this new IR calibrator reaches -30°C (22°F) in normal ambient conditions. With a conveniently located dry gas fitting on the front bezel, ice build up on the target can be avoided. At the upper end of its range, the Hart Scientific Model 9133 portable infrared calibrator provides stable temperatures to 160°C (320°F). With heating and cooling times of about 15 minutes from ambient to either extreme, the Hart Scientific Model 9133 portable infrared calibrator gets you to temperature quickly and performs when it gets there. Compare your IR devices to the temperature display which is factory calibrated to be within ±0.4°C (±0.7°F). |
Whether you're using in-line or handheld infrared pyrometers, you need good calibration standards to verify their accuracy. Hart Scientific portable infrared calibrators provide stable blackbody targets for calibrating non-contact infrared thermometers from -30°C to 500°C (-22°F to 932°F). 
