Isolation Transmitters, Signal Splitters And Amplifiers From Inor

Inor IsoPAQ-30P Isolation Transmitter

The Inor IsoPAQ-30P isolation transmitter is a low-cost transmitter used for basic isolation and conversion of 0-20 mA, 4-20 mA and 0-10 V unipolar signals.

Due to the calibrated range selection of the input/output signals and the universal power supply, IsoPAQ-30P provides excellent flexibility and low storage and installation costs.

The high reliability ensures a safe system operation and low maintenance costs.
Inor IsoPAQ-30P Basic Isolation Transmitter Datasheet
Inor IsoPAQ-30P Basic Isolation Transmitter Manual

Inor IsoPAQ-32P Isolation Signal Splitter

The Inor IsoPAQ-32P isolation signal splitter is used for isolation and conversion of 0-20 mA, 4-20 mA, 0-5 V and 0-10 V standard signals. The design and high isolation level (2.5 kV) provide protection for service personnel and downstream devices against impermissibly high voltage.

The input signal and the two output signals can be selected in any combination. The signal combination is decided by the Part No.

The high accuracy and reliability and the Protective Separation are further features, which ensure a safe system operation.
Inor IsoPAQ-32P Isolation Signal Splitter Datasheet
Inor IsoPAQ-32P Isolation Signal Splitter Manual

Inor IsoPAQ-131P Isolation Transmitter

The Inor IsoPAQ-131P isolation transmitter is used for isolation and conversion of 0-20 mA, 4-20 mA and 0-10 V unipolar signals. For applications where normally one signal combination only is used, IsoPAQ-131P offers a cost-effective alternative. The high reliability and the Protective Separation are further features, which ensure a safe system operation.

The COMPACT LINE is a line of very compact and cost-optimized Isolators, Transmitter Repeaters and Isolating Transmitters within the IsoPAQ family. The small dimensions - only 60 mm deep and 11.2 mm wide – and the favorable pricing allow for space saving and economic installations.
Inor IsoPAQ-131P Isolation Transmitter Datasheet
Inor IsoPAQ-131P Isolation Transmitter Manual

Inor IsoPAQ-40P Isolation Transmitter

The Inor IsoPAQ-40P isolation transmitter is used for high-precision isolation and conversion of 0-20 mA, 4-20 mA and 0-10 V unipolar signals. The input and output range in mA or V can be set by using DIP switches without any further adjustments. The design and high isolation level (4 kV) provides protection for service personnel and downstream devices against impermissibly high voltage.

Due to the calibrated range selection of the input/output signals, the selectable bandwidth and the universal power supply, IsoPAQ-40P provides excellent flexibility and low storage and installation costs.

The high reliability and the Protective Separation are additional features that ensure a safe system operation.
Inor IsoPAQ-40P High-performance Isolation Transmitter Datasheet
Inor IsoPAQ-40P High-performance Isolation Transmitter Manual

Inor IsoPAQ-41P Isolation Transmitter

The Isolation Transmitter IsoPAQ-41P is used for high-precision isolation and conversion of 0-20 mA, 4-20 mA and 0-10 V unipolar signals. The design and high isolation level (4 kV) provides protection for service personnel and downstream devices against impermissibly high voltage.

For applications where normally only one signal combination is used, IsoPAQ-41P offers a cost-effective alternative.

The high reliability and the Protective Separation are additional features that ensure a safe system operation.
Inor IsoPAQ-41P High-performance Isolation Transmitter Datasheet
Inor IsoPAQ-41P High-performance Isolation Transmitter Manual

Inor IsoPAQ-51P Isolation Transmitter

The Inor IsoPAQ-51P isolation transmitter is used for high-precision isolation of 0(4)-20 mA unipolar signals.

For applications where normally only one signal combination is used, IsoPAQ-51P offers a cost-effective alternative.

The zero and span adjustments allow for a fine-tuning of the measurement loop. The high reliability and the Protective Separation are additional features that ensure a safe system operation.
Inor IsoPAQ-51P High-performance Isolation Transmitter Datasheet
Inor IsoPAQ-51P High-performance Isolation Transmitter Manual

Inor DA561 Isolation Amplifier

The Inor DA561 Isolation Amplifier is specially designed for signal isolation and load amplification in the process industry. A 2-wire transmitter can be connected to and supplied from the isolation amplifier. The DA561 maintains a high isolation level (1,5 kV) between input and output. Current and voltage can be chosen independently as input and output signals.

Applications include:

•Voltage feed for a 2-wire transmitter, and galvanic isolation from its mA circuits.
•Galvanic isolation, when a mA signal is connected, to more than one measurement or monitoring system.
•Conversion of measurement range 0-20 mA to 4-20 mA or vice versa.
•Load amplification and isolation when extra high load capacity is needed.
A 2-wire, 4-20 mA, transmitter can be connected directly to the input of the DA561, thanks to the built-in transmitter supply. The DA561 is designed for the most usual input and output process signals, such as mA and V. Input and output ranges are changed with the help of jumper connections, and a simple instruction table. Fine adjustment of the amplifiers zero point and span can be made with potentiometers accessible from the front of the unit.

The DA561 meets the high demands from the process industry of good EMC performance. Criterion A applies for all EMC tests, which means that the amplifier stays within specifications during EMC influence.

The mA output signal can be measured on the front terminals with a low-ohm mA instrument without breaking the output circuit.

The DA561 is connected via plug-in screw terminals. The terminal blocks and cables are easy to disconnect from the unit for convenient dismantling and service. Installation is simplified by connection. TheDA561 snaps on to a 35 mm DIN-rail and can be mounted with high density.
Inor DA561 isolation Amplifier Datasheet
Inor DA561 isolation Amplifier Manual

Inor DA562 Dual Channel Isolation Amplifier

The Inor DA562 Dual Channel Isolation Amplifier is specially designed for signal isolation and load amplification in the process industry. Two independent and galvanically isolated channels allow for high-density mounting. DA562 maintains a high isolation level (1,5 kV) between input, output and the two channels. Current and voltage can be chosen independently as input and output signals.

Applications include:

•Galvanic isolation, when a mA signal is connected, to more than one measurement or monitoring system.
•Conversion of measurement range 0-20 mA to 4-20 mA or vice versa.
•Load amplification and isolation when extra high load capacity is needed.
The two channels are fully isolated from each other and can be individually adjusted regarding input and output ranges. The DA562 is designed for the most usual input and output process signals, such as mA and V. Input and output ranges are changed with the help of jumper connections, and a simple instruction table. Fine adjustment of the amplifiers zero point and span can be made with potentiometers accessible from the front of the unit.

The DA562 meets the high demands from the process industry of good MC performance. Criterion A applies for all EMC tests, which means that the amplifier stays within specifications during EMC influence. The mA output signal can be measured on the front terminals with a low-ohm mA instrument without breaking the output circuit.

The DA562 is connected via plug-in screw terminals. The terminal blocks and cables are easy to disconnect from the unit for convenient dismantling and service. Installation is simplified by connection diagrams on the front panel. The DA562 snaps on to a 35 mm DIN-rail and can be mounted with high density.
Inor DA562 Dual Channel Isolation Amplifier Datasheet
Inor DA562 Dual Channel Isolation Amplifier Manual