MC/MCR Series Digital/Analog Mass Flow Controllers - Alicat Scientific
|
The Alicat mass flow controllers are engineered to meet the following design criteria: Simplicity The MC series mass flow controller is very easy to use. With the local display, users can make changes to the configuration of the unit without the need for computers, complicated software or scripts. Mass Flow Controller Accuracy Alicat MC series mass flow controllers can be configured with an accuracy spec of up to +/-(0.4% of reading + 0.2% of full scale) with a high-accuracy calibration. Standard calibrations are rated at +/-(0.8% of reading + 0.2% of full scale) Mass Flow Controller Repeatability Alicat’s patented technology allow its mass flow controllers to have very few moving parts. All of the MFC’s internal components are fixed in place resulting in very little physical change inside the MFC. Little physical change in the flow cavity means higher rates of consistency and repeatability. Alicat MC series mass flow controllers have a repeatability of +/-0.2% of FS Reduced Cost of Ownership Alicat MC/MCP/MCR series flow controllers require very little power to run thereby reducing operating costs. MC and VC series flow controllers also have less pressure drop when compared to similar flow devices. Reduced pressure drop means more process fluids go into your process and not into your measurement devices. The MC series mass flow controllers also measure pressure, temperature and volumetric flow in addition to mass flow which means fewer instruments you will have to buy and install. Control Speed The Alicat MC/MCP/MCR series mass flow controller has a response time of less than 10ms and a control time of 100ms making it one of the fastest naturally responding mass flow controllers on the market today. See just how quickly an Alicat MFC responds to changes in this short video. Versatility MC series mass flow controllers are available in any flow range from 0.5SCCM through 2000SLPM. The MFCs are equipped with multiple analog outputs and inputs. Adding a totalizer allows users to see how much media has flowed through the MFC, making it a great way to monitor usage and identify waste. Dependability There are currently over 60,000 Alicat products in service around the world. Alicat mass flow controllers are being used in processes like pharmaceutical and semiconductor manufacturing, fuel cell research, auto paint application, and emissions compliance equipment. Alicat Scientific mass flow controller calibrations are NIST traceable. Standard Features •Fully functional digital display Optional features and equipment •High accuracy calibration |
Alicat’s MC/MCR series digital/analog mass flow controllers are designed to take the guesswork out of process gas delivery. As companies continue to drive for more efficient processes the call for greater output and less waste demands precision gas flow control. Alicat’s MC/MCR series mass flow controllers use patented laminar flow technology and a high speed, low drop, control valve Alicat mass flow controllers deliver accurate and precise gas flow control. With a number of standard features like 200:1 turndown ratio, 30 user selectable gas calibrations, fully functional digtial display, and a lifetime warranty Alicat mass flow controllers are designed to offer industry leading performance for a lifetime.
