|
|
|
Specialty
Pumps from IR ARO
|
Specialty Pumps
& Electronics
| |
Accessories |
 |
|
Cone
Check™ Diaphragm Pumps
 Developed
especially for handling high-solids and abrasives like those
found in stone, clay and glass applications, the new Cone Check
Pumps offer the process professional a high-performance, high-endurance
alternative to traditional diaphragm pumps with ball-style checks.
In laboratory and field tests, the new ARO Cone Checks have
proven to outlast standard checks by as much as 5-to-1 according
to the manufacturer. In one test involving abrasive ceramic
slurry, the trial Cone Check Pump lasted 2-years without failure.
Utilizing a hexagonal valve design that opens and closes with
each cycle of the pump, the cone check is more suited to easy-flow
passage of particles and abrasives while maintaining critical
back pressure.
Cone Check™ Diaphragm Pump Features:
- Durable-yet-Flexible Hexagonal
Checks Provides Smooth Material Passage with Very Low Turbulence
and Minimal Manifold Wear.
- Fluid Flow Options: Top-to-Bottom
(For Avoiding Pump Pack-Out of Abrasives and Semi Solids),
Bottom -to-Top (For Clean Fluid Transfer)
- Outlasts Ball-Checks by as
much as 5-to-1
- Available in 1-1/2", 2" and
3" Port Sizes, Aluminum, Cast Iron and Stainless Steel Construction.
85 to 195 GPM Maximum Flow
- Patented Stall-Free Air Motor
/ Valve Design
- Ice-Free Operation
- Bolted Construction for Leak-Tight
Integrity
- 5-Year Warranty
Process and fluid handling professionals
interested in learning more about the new ARO Cone Check Diaphragm
Pumps can do so by contacting their ARO Process Pump House Distributor
or by contacting the manufacturer.
Powder Transfer
Systems
 The
air-operated Powder Transfer System is designed specifically
for the transfer of process powders up to 40-lbs/cu.ft (721-kgs/cu.m).
ARO's new Powder Transfer System, a modified diaphragm pump,
incorporates patented stall-free air valving together with a
new air induction system (patent pending) that boosts efficiency
and eliminates powder pack-out at startup.
The new ARO Powder Transfer System
replaces messy manual powder transfer processes and has proven
to be much more economical and more simple than large installed
"systems".
In rigorous testing (both laboratory
and field), the ARO® Powder Transfer System has proven to
routinely deliver pack-free, trouble-free powder transfer at
a fraction of the cost that installed systems demand.
Features of the ARO® Powder
Transfer System
- Replaces Messy, Inefficient
Manual Processes
- Reduces Airborne Contamination-Through
Direct Container-to-Recipe Transfer
- Patented Air-Induction System
Avoids Powder Pack-Out
- Economical & Simple-Unlike
Large, Complex, Costly Installed Systems
- Portable: Can be Easily Moved
from Site-to-Site
- Available in 2" or 3" Port
Sizes, Stainless Steel or Aluminum Body
- Can be Applied to a Wide
Variety of Dry Process Powders including Fumed Silica, Carbon
Black, Expanded Mica, Micro-Bubbles, Acrylic Resins, Silicones
and more.
S-Tran
Sanitary Pumps
 The
S-Tran pump comes with the patented "Unstallable" air valve
and the non-freezing "Quick Dump" technology that is so popular
on the IR ARO standard diaphragm pumps.
Typical Applications where the
new S-Tran pump may be utilized include the following: Food
Processing, Cosmetics, Pharmaceutical, Chemical Additives, and
Adhesives (Food grade)
Features of the S-Tran Series
Diaphragm Pumps
- Constructed of FDA Accepted
Materials
- Electro-Polished 316 Stainless
Steel Fluid Section
- Bolted Construction with
all Stainless Steel Hardware
- Available in 2" and 3" Tri-clamp
Style Fitting
Drum
Pumps
 ARO
offers an entire line of air-operated drum pump packages and accessories
developed to provide quick and efficient fluid transfer and supply
from 55-gallon drums and bulk tanks. Featuring an ARO®
Diaphragm Pump ( ½" fluid ports), the new ARO Drum Pump
line offersthe following:
- Quick, Convenient Drum Changeout
- Choice of Aluminum , Stainless
Steel or Polypropylene Body Construction- ARO Drum Pumps are
available in three body materials for optimum fluid compatibility.
- 11 GPM Flow Capability- Drum
Pumps offer plenty of capacity to satisfy a broad range of
transfer application volume demands.
- Stall-Free Operation- ARO
Diaphragm Drum Pumps feature a patented "unbalanced" air valve
design that avoids stall-out, even under low air-inlet pressures.
- Bolted Construction- Unlike
traditional band-clamp style pumps, ARO Diaphragm Drum Pumps
utilize bolted fasteners for leak-tight integrity.
- Package Components Factory-Matched-
ARO Drum Pump package components (adapters, siphon tubes,
etc.) contain pre-specified, matching materials of construction
for complete fluid compatibility.
- Choose from Basic to Complete-
Drum Pump Packages can be ordered in 3 styles:
- Basic: Pump, Bung Adapter,
Air Safety Shut-Off, Siphon Tube.
- Complete/Transfer: Pump,
Adapter, Shut-Off, Siphon Tube and Fluid Hose or Fluid Hose
with Non-Drip Nozzle.
Complete/ Dispensing: Pump, Adapter, Shut-Off, Siphon Tube
with Foot Valve, Hose and Dispensing Fixture.
De-Watering
Pumps
 If
you are looking for high flow in low places, ARO has just the
pumps for you. ARO offers rugged, self-priming air-operated
centrifugal sump pumps and screened inlet diaphragm pumps for
the following applications:
- Construction: Pumping out
excavations, flooded work sites and tunnels
- Mining: Pumping out shafts,
tunnels, and quarry pits
- Chemical Process: Pumping
fluids with acids, pumping slurries
- Marine: Pumping out
dry dock, cleaning ship holds and tanks, and emergency bilge
pumping
- Industrial Maintenance:
Cleaning tanks, pumping out derailed tank cars, machine coolant
supply, pumping out fuel tank
|
|
