•
Fail Safe- gives immediate positive shut-off in the event of cold
water failure.
•
Automatically mixes steam and water proportionally, heating it
to a selected temperature.
•
Provides a ready supply of hot water when and where it is needed.
•
Eliminates the need for hot water storage.
•
Broad application versatility.
•
Quiet and economical operation.
•
Four sizes to suit requirements.
STEAM
AND WATER MIXING VALVE
HOW IT WORKS.
When the outlet control
is opened, cold water flows into the valve body. The change in
differential pressure raises the piston, lifting the steam valve
from its seat. Steam then combines with the cold water in the
mixing chamber to create instantaneous hot water.
Once the outlet control
is closed, the fixed loading spring, reinforced with static water
pressure, forces the piston down and closes the steam valve. In
the absence of cold water pressure, steam cannot escape through
the outlet. This failsafe principle is the heart of the Dynafluid
2000 design. It's fast, simple, efficient, and cost effective.
CONSTRUCTION
Dynafluid 2000 valves
are manufactured and assembled to high quality standards.
The body is of high-density cast bronze. Springs and steam
valve are stainless steel (series 300). The valve seat is glass
filled PTFE designed for long life and high pressure conditions
and can easily be replaced. The valves are thoroughly use-tested
and inspected prior to shipment. The are guaranteed to be
free form defects in workmanship and materials for a period of
one year from date of purchase.
CUSTOMIZING
By changing the factory installed
fixed loading spring the valve can be customized for varying steam
pressures. Unless otherwise specified, the spring is normally
factory installed for steam pressures of 50-100 PSI. Other
ranges (1000-150 PSI or 5-50 PSI) are available.
