 |
MODEL 3002
Stirrer, air driven, 1/6 horse power, 0 to 6000 rpm, with
needle valve speed control and tubing connector, silencer,
corrosion resistant chuck. 12 inch shaft and 2 inch diameter
propeller are of stainless steel. Motor diameter, 2 1/2".
Weight, 3 lbs. Maximum free air consumption, 7.6cfm at 80
lbs. input pressure.
MODEL 4000
Stirrer, air driven, 1/2 HP,0 to 2000 rpm, with speed control
valve, tubing connector, silencer, 1/2 inch capacity corrosion
resistant collet chuck; stainless steel shaft, 1/2 x 15";
stainless steel propeller, 3 inch diameter. Motor diameter,
4". Wt. 8 lbs. Maximum free air consumption, at 80 lbs. input
pressure, 13.5 cfm.
MODEL 4100
Stirrer, as above, but 1 HP, 3" propellers. Wt. 10 lbs. 25
cfm.
MODEL 3050
Stirrer, air driven, geared for viscous materials, 1/6 HP,
0 to 600 rpm, with needle valve speed control, tubing connector,
silencer, 3/8 inch capacity three jaw chuck.
MODEL 3 Geared
air-driven stirrer for viscous or colloidal materials, heavily
loaded liquids, or where slow speed is desirable. 1/6 hp air
motor 0 to 600 rpm. 3/8" capacity 3 jaw chuck. Same motor
as Model 1, but geared down 1 to 5. Weight 6 lbs.
MODEL 1 1/6
HP 0-6000 RPM. Similar to Model 3002, but equipped with a
mounting clamp.
MODEL 2 1/2
HP - 2000 RPM. SImilar to Model 4000, except equipped with
shaft held in sleeve by set screws. |
