|
 DP15TL
- Multiple Range Differential Pressure Transducer Kit
Description
Applications
Specifications
Theory of Operation
Installation
& Operating Instructions
Troubleshooting
Guide
 Description
The DP15TL is a general purpose
differential pressure transducer that features a kit containing
7 field replaceable sensing diaphragms so that the full scale
range of the sensor may be changed between +/-1 and +/-3000 psid.
Using a companion carrier demodulator such as the CD15,
the DP15TL is useful in a wide variety of laboratory applications
where pressure measurement requirements constantly change.
. The rugged construction of the
DP15 sensor makes it highly resistant to shock and vibration.
Because the diaphragm is the only moving part, the frequency response
of the DP15 to pressure pulsation's is exceptionally high.
The two symmetrical body parts
are easily disassembled and reassembled with sensing diaphragms
using the wrench furnished. The DP15 will accept liquids and gases
on both sides, and is constructed of 410 stainless steel. The
bleed ports in the sensor facilitate complete purging of liquid
filled systems for dynamic measurements.
Spare O-ring, bleed screws, gaskets
and an electrical connector are included in the handy storage
box.
Applications:
Specifications
Ranges: +/-1, +/-5, +/-20,
+/-75, +/-250, +/-1000, +/-3000 Psid
Accuracy: +/-0.5% FS include non-linearity, hysteresis,
and non-repeatability
Overpressure: 200% FS , to 4Kpsi
Line Pressure: 3200 psig
Output: +/-35 mV/V, nominal
Inductance: 20 mH, each coil
Zero Balance: Within +/-5 mV/V
Excitation: 5Vrms, 3KHz to 5khz
Pressure Media: Liquids and Gases compatible with 410 SST
Temperature Range: 0 to 165 deg F, standard, -65 to +250
deg F, extended
Temp Effect on Zero: 1% FS/100 deg F, typical
Temp Effect on Span: 2%/100 deg F, typical
Pressure Connection: 1/8 inch female NPT
Electrical Connection: PT02A-10-6P Bendix or equal
|
