| Product |
D119 |
| Description |
Sensaphone Remote Monitoring System - 8 Contacts |
| Image |
 |
| Features |
The D119 is a fully programmable, environmental monitoring system that offers extensive on-site and remote monitoring capability to computer rooms, equipment rooms, remote facilities, small businesses, greenhouses, farms and private homes. The D119 monitors temperature, Sound and Power Failure, additional sensors are available. Designed for desktop or wall mounting, the D119 is simple to install, program and operate - no changes to standard electrical or telephone service is required. Once connected to a telephone line, the Sensaphone will respond to an alarm by dialing up to four separate telephone numbers. When the call is answered, an "Alert Condition" message is delivered in digitized speech. The status of each monitored condition is readily obtained at the unit's installation site, or remotely by telephone. At the close of every status report, time is provided for listening to actual on-site sounds.
- Calls user at up to 8 locations - including beepers and pagers - if an alarm condition occurs
- User can call unit using any telephone to receive status reports or listen in
- Monitors: Temperature, sound, humidity, water and AC power failure (with optional sensors, see Accessories)
- User selectable inputs: 8
- Dials numbers in sequence until acknowledged
- Simple to install - no changes to standard electrical or phone service required
- Programmable security code access
- Local and remote enabling/disabling of all dial-out conditions
- AC powered with battery back-up
- 30 Day Money Back Guarantee
|
| Notes |
Available Sensors
Temperature Alert: A117
Remote Temperature Sensor: A118
Magnetic Reed Switch: A119
Passive Infrared Motion Detector: A120
Water Detection Sensor: A121
Humidity Sensor: A122
Click on the Accessories link above to see pricing for the above sensors.
|
| Specifications |
Ambient Operating Conditions (body of unit): +32 to +120°F (0 to +50°C) and 0 to 90% RH (non-condensing)
Approvals: NRTL listed for compliance with UL standard 1459
Battery Type: Six 1.5 volt "D" cell alkaline batteries (not included) for back-up power
Dial Out: Pulse or tone dial out (default is tone) and stores up to four 32 digit numbers (including pauses, # and *)
Dial In: Use any telephone to dial Sensaphone for voice simulated status report of listen in to monitored area
Dimensions: 7.5" W x 2" x 8.5" D
Telephone Interface: FCC approved RJ-11 plug-in modular connector with 6' cord
Power Requirement: 120 VAC 60 Hz 15 W
Ranges - Basic Unit Temperature: +32 to +120°F
Sound: Adjusts to ambient -- excesses trip alarm
Power: Lack of trips alarm (batteries required)
Optional Sensors Remote Temperature Probe: -20 to +150°F Motion: Passive infra-red motion -- detects warm bodies Water: Detects presence of water of a horizontal surface Magnetic Reed: Where switch contact is broken Humidistat: When humidity exceeds or falls below set limit -- range 10 to 60% RH
Sensors: Any of the optional sensors can be attached using 22 gauge wire. Sensors can be several hundred feet from unit as long as the total resistance of the circuit is not greater than 50 ohms. (External sensors can not be used if they supply any voltage or current to the D119 Sensaphone.)
Weight: 4 lbs. (1.8 kg)
Includes: Detailed Instruction Manual |
| Manuals |
 D120_manual.pdf
D118_manual.pdf
D119_manual.pdf |
|
|
