| Product |
SX100 |
| Description |
Temperature Data Logger(°F/°C Switchable) |
| Small Image |
 |
| Features |
The Dickson SX100 sets a new standard in affordable, accurate, and easy-to-use PC based recording. The SX100 is a self-contained, low cost, single channel temperature Data Logger. Its low cost makes it a great preventive maintenance tool. Building Managers place them through out their facilities constantly logging data so when a temperature issue does arise they already have the data to review. That issue may not arise for months but they are prepared today! Great for HACCP, SPC, and Quality Control as well.
- Ideal for accurate recording of temperature for quality control.
- Recorded temperature data is easily downloaded and integrated into spreadsheets and documents
- Battery Operation - 1 Year battery life
- Stores 7,680 Sample Points
- Temperature Range -40 to +176°F (-40 to 80°C)
- Delayed Start Capability
- Faster Downloading
- 30 Day Money Back Guarantee
User friendly DicksonWare software creates a graph of your data in seconds. DicksonWare features include complete customization of your graph, zooming, and viewing your data in tabular format. You can also view data from several loggers on a single graph enabling easy comparison of multiple sets of data. Transferring the data into documents or spreadsheets is a snap! Test a FREE software demo version -- see the software section of this site
|
| Notes |
|
| Specifications |
Temperature Range: -40 to +176°F (-40 to +80°C)(non-condensing)
Internal Temperature Accuracy:±1.8°F(±1°C) over range 14 to 176°F (-10 to +80°C; ±3.6°F(±2°C) over range 14 to -40°F (-10 to -40°C)
Temperature Sensor: Internal digital temperature sensor
Ambient Operating Conditions: -40 to +176°F (-40 to +80°C); 0-95% RH non-condensing
Power Source: 3V Lithium coin cell battery, approximately 1 year at 1 minute sampling (user replaceable)
Power Status Indicator: LED - Flashes when sampling
Data Capacity: 7,680 Sample Points
Sample Interval: Variable from 10 seconds to 24 hours in 10 sec increments
Calibration: User: None; Factory: Zero pt.
Resolution: 0.9°F (0.5°F)
Memory: Non-volatile (retains data even when battery is removed)
Approvals: CE
Enclosure: Polycarbonate
Dimensions: 3.1" x 2.1" x 0.9" (79mm x 54mm x 22mm)
Weight: 1.8 oz (49g)
Response Time: 10 minutes to move 63% of full scale Note: A015 must accompany the initial purchase of the SX100 in order to operate
A015 - DicksonWare & Download Cable Specifications
PC Software Features: Windows? based, variable sample interval, data wrap-around, viewing data, graphing and zooming
Software: Microsoft 95, 98, 2000, XP and NT compatible
PC Requirements: PC w/386 or better micro processor, 4M RAM, 1 free COM (Serial) port, CD drive
Version Required (Minimum): 6.0.0.5
Cable Type/Length: 9 pin male D-shell to male 2.5mm stereo plug, 6 feet long
Computer Interface: RS-232 COM (Serial) port.
Optional NIST traceable certificate of calibration available |
| Manuals |
 x-logger.manual.pdf |
|
|
