EDEN
Thermocouple Pocket Thermometer
with Remote Probe
Available
Probes:
- PROBE
EM K-type thermocouple surface probe. Applications: Solids,
plates, furnaces, molds.
- PROBE
EP Penetration/General Purpose K-type thermocouple probe. Applications:
Liquid, air, penetration of semi-solids.
- PROBE
EC K-type thermocouple Air/Gas probe. Applications: Air and
Gas.
- PROBE
EL Liquid/General Purpose K-type thermocouple probe. Applications:
Liquid, air.
- Specifications
EDEN
is a pocket thermometer using a K-type thermocouple probe with a 3.3'
(1 meter) cable. With a response time of less than 20 seconds in water,
EDEN is the ideal tool for all high temperature applications where
extreme accuracy is not necessary. If your temperature range does
not exceed 1200°F (650°C) and does not require extremely accurate
readings, there is no need to purchase an expensive thermometer. There
are 4 interchangeable temperature probes available to meet your specific
requirements. In the HVAC field, gas and air can be monitored with
the 'EC' probe. The 'EM' probe is perfect for machine shops and molding
facilities. Probe 'EP' is for penetration when you need the fast response
typical of a thermocouple probe. The 'EL' probe is for general liquid
monitoring. Each probe is made of a rugged AISI 316 stainless steel
shaft that resists the harmful effects of chemicals and high temperature.
EDEN
is supplied complete with PROBE EL, 3 x 1.4V batteries and
instructions
Specifications:
HI 98520 HI 98519
Eden F Eden C
Range: -40°F to +1200°F -40°C to +650°C
Resolution: 1°F 1°C
Accuracy: ±4°F ±2°C
Typical EMC Deviation: ±4°F ±2°C
Battery Type: 3 x 1.4V batteries
Battery Life: 700 hours of continuous use
Environment: 32 to 122°F (0 to 50°C); RH 95%
Dimensions: 106 x 68 x 21 mm (4.2 x 2.7 x 0.8")
Weight: 80 g (2.8 oz.)
Response Time: Approx. 20 seconds in water (probe EL)
