 The MVS-7000 Series represents a breakthrough in light output performance and versatility in Machine Vision Strobes. These high intensity strobes incorporate latest innovation in flashlamp technology and reflector design.
The MVS-7000 series delivers over 40% more light output per watt than our MVS-2027 series - taking its place as the new industry standard...The Xenon Flashlamp produces intense pulses of radiant energy covering the ultraviolet (UV), visible (VIS) and near infrared (NIR).
When coupled to a CCD/CID camera system, the strobe "freezes motion" which eliminates blur and enhances image quality. Several variations of the MVS-7000 series are available, each optimized for maximum light output at a specific flash rate. External signal inputs allow you to further customize the strobe to your application.
The MVS-7000 series is certified to the latest European CE directives for Safety and Emission. The universal AC power supply recognizes AC voltages from 90V to 230V (± 10%) with line frequencies from 50 - 60 Hz. The xenon flashlamp is housed in a field replaceable module.
| Optical Specifications (1) |
| |
MVS-7010 (2) |
MVS-7020 |
MVS-7060 |
| Maximum flash rate (3) |
10 Hz (22 - 6 Hz) |
20 Hz (45 - 13 Hz) |
60 Hz (135 - 38 Hz) |
| Input energy per flash (4) |
4.3 J (1.9 - 6.8 J) |
2.2 J (1.0 - 3.4 J) |
0.7 J (0.3 - 1.1 J) |
| Light output flash duration (5) |
20 µsec |
10 µsec |
8 µsec |
| Photometric light output (6) |
45 lumen-sec |
26 lumen-sec |
10 lumen-sec |
| (7)
|
28 lumen-sec |
16 lumen-sec |
7 lumen-sec |
| (8)
|
14 lumen-sec |
7 lumen-sec |
3.5 lumen-sec |
| Radiometric light output (6) |
340 mJ |
190 mJ |
75 mJ |
| (7)
|
210 mJ |
120 mJ |
50 mJ |
| (8)
|
110 mJ |
55 mJ |
25 mJ |
| Spectral bandwidth |
250 - 1100 + nm |
| Note: High intensity may cause damage to plastic fiber optic light guides. Contact the manufacturer for temperature limits. |
| Electrical Specification |
| Input voltage |
90 - 230 Vac (± 10 %), 50 - 60 Hz |
| Maximum output power |
43 W |
| Input current (rms) |
1 A @ 115 Vac |
| Flashlamp voltage (9) |
400 - 750 Vdc |
| Remote intensity control |
5 - 10 Vdc (Vref: Vlamp = 1 : 75) |
| External trigger input (10) |
+5 V TTL pulse, 20 mA, > 10 µsec (into a 4N36 opto-isolator) |
| Environmental Specifications |
| Operating temperature |
-10 to +110ºF (-23 to +43ºC) |
| Storage temperature |
-40 to +194ºF (-40 to + 90ºC) |
Notes:
1) All values are nominal; specifications subject to change without notice.
2) Limited lamp life due to high peak currents; select the MVS-7020 for MVS-7060 for most applications.
3) Maximum flash rate at 600 Vdc; the numbers in parenthesis represent the max. flash rate at adjusted lamp voltage (400 - 750 Vdc).
4) Energy at 600 Vdc; energy per flash is voltage dependent (E = ½ CV2) and discharge capacitance is 24 µf, 12 µf and 4 µf respectively.
5) Approximate values measured at 1/3 peak of light pulse.
6) Approximate light output at factory setting into 0.9" (23 mm) diameter fiber optic light guide.
7) Approximate light output at factory setting into 0.5" (13 mm) fiber optic light guide.
8) Approximate light output at factory setting into 0.27" (7 mm) fiber optic light guide.
9) Factory set at 600 Vdc; increasing lamp voltage will reduce lamp life.
10) Delay between flash command and light output is 8 µsec typical.
11) Optional fiber optic nosepieces: Fostec 0.72" ID (MVS-23), Volpi 0.59" ID (MVS-24), or Dolan Jenner 1.0" ID (MVS-25).
Mechanical Specifications
|
