Extruder Accessories from Heaters Control And Sensors

Blank Melt Bolts

Blank Melt Bolts are used to close or block existing melt temperature or pressure vents, where pressure transducers or temperature thermocouples are no longer being used.

FuzyPro Melt Pressure Transducers

FUZYPRO's melt pressure transducers/transmitters are developed and made 100% from stainless steel in mass production. Our melt pressure transducers are suit to measuring and controlling the pressure of some high temperature melts such as chemical fiber, plastic, rubber and petrifaction or other over proof liquids.

Melt Temperature Thermocouples

Melt Temperature Thermocouples are temperature sensors that are used in extruders where plastic melt temperatures need to be measured. Melt Temperature Thermocouples are ruggedly manufactured in 316 Stainless steel with flexible armour construction along with a high temperature plug.

Pressure Transducers For plastic extrusion are used to measure pressure up to 20,000 PSI. Pressure transducers are available  with a variety of outputs like 0 - 5 Volts, 4-20 mAmps,1 to 6 VDC 0.1 to 5.1 VDC or millivolts. Measurements can be made in Gage, absolute, Barometric, Differential, compound or vacuum.

Rupture Discs

Rupture Discs are used as over pressure protectors, when normal running pressures are exceeded. Rupture Discs are made of stainless steel and fit most extruders that have melt pressure or melt thermocouple vents on the barrel.