|
The PRESSURE PAL is ideal for feeding and pressurizing
closed hydronic systems that require cold static fill pressures
higher than 25 and lower than 35 psig. It is compatible with
both water and glycol/water solutions. Perfect for small boiler/chiller
systems, snow/ice melt circuits, outside air heating/cooling
glycol coils, solar heating systems..
Features
And Benefits
- 6.0 US gallon (22.7 liter) tank for storage and mixing
- Power supply plugs into any standard 115 VAC outlet
- Diaphragm pump can run dry without damage
- No direct connection to potable water supply eliminates
need for backflow prevention
- Make-up fluid stored in the feeder tank can be pre-treated
- Diverter valve allows easy purging of air on initial start-up,
and manual agitation of solution
- Prevents major floods - in the event of system rupture,
only the contents of the tank will be pumped into the system
 Provides
leak detection - dropping fluid level provides immediate notice
that the system has developed a leak- Fluid drained for service can easily be put back into the
system
- Fluid level switch shuts the pump off if the storage tank
level gets too low
- Auxiliary dry contact included for remote low pressure alarm
(alarm optional or by others)
MF200S
PDF Brochure
Installation
& Maintenance
|
