|
|
|
Instronic
Inc., New Products |
Ratemeter/
Totalizer/Batch Contoller
 The
3820 Process Display offers many outstanding features. The
high visibility 6-digit red LED display features large 0.5"
sevensegment characters. User-selectable digital scale and
offset converts the input signal to any desired unit of
measure. The 3820 is available in 4-20 mA (3820-27), 0-5VDC
(3820-23), and 0-10VDC (3820-25). A rugged aluminum case
and NEMA 4 front cover is standard.
Home
| ATC Digitec Products | Request
Information | Download
Brochure |
Tension
& Compression Load Cell From Futek
 FUTEK
L2920 PANCAKE LOAD CELL is a direct replacement for
the Lebow Model 3132, the latest product of their Advanced
Sensor Technology designs. It is a one piece construction
design with multiple parallel beams and a fixed centre guide
which helps to compensate for extraneous loads and moment
situations. With is reduced size, advanced construction
of PH 17-4 heat treated stainless steel, with built-in tension
base for in-line loading and improved off-center load capabilities,
positions this sensor as an excellent product for Automation
companies. Product is available from 250 to 5000 lbs capacity,
immediate delivery.
Home |
Futek Products | Request Information |
Dual
Range, DC Operated Non-Contact Torquemeters
 The
MCRT® 79000V series was developed to accurately measure
torque when the ratio of peak to average torque is high.
In that situation, a conventional torquemeter must be oversized
to avoid damage - a process which greatly reduces accuracy.
Conditions that create high peak to average ratios include
starting, stopping or reversing inertial loads, torsional
oscillations, and diesel and single cylinder engine/compressor
drives. Additional, when peak torque's are unknown, an MCRT
79000V reduces the risk of damage from unexpected or accidental
torque spikes.
An MCRT 79000V can accurately measure low running torque
and high transient spikes without the expense of using several
conventional sensors.
Home |
Himmelstein Products | Request
Information |
Model
721 Mechanical Power Instrument
These
advanced instruments provide engineering unit display
of a strain gage (mV/V) input and a frequency input. They
also compute power and perform 21 functions including
limit checks, tare, hold, and max/min capture. You needn't
write code or add hardware to be up-and-running a productive
test.
The
two line alphanumeric readout displays measured and computed
data, units of measure and test status. Transducer calibrations
are fully automatic, requiring no manual adjustments.
Home |
Himmelstein Products | Request
Information
|
LVDT
Conditioners
 These
instruments are full featured conditioner/readouts; the
Model 704 handles one and the Model 744 handles two LVDT
inputs. Both provide fast accurate data for each input.
Built-in processing functions and real time digital calculations
make the model 704/744 powerful test analyzers with easily
configured characteristics. No need to write code or add
hardware to be up and running a productive test.
The alphanumeric readout displays measured and computed
data, units of measure and test status. It guides you with
English language prompts. There are no manual adjustments.
Calibration is simple; enter the full scale in engineering
units and the instrument provides 0.01% accuracy and +/-
and/or +/-10V analog outputs at full scale. Keystrokes access
measured data, derived data, stored data, limit status,
and/or I/O status without test disruption. User set values
may be password protected, when needed.
Home |
Himmelstein Products | Request
Information |
RD298
ShockLog™ Shock Recorder
 The
RD298 ShockLog is a programmable, re usable electronic,
tri-axial shock recorder designed specifically to help organisations
to reduce the cost of damage to goods whether in production,
transit or storage.
A battery life of up to
12 months allows you to understand the entire supply chain
life of your product and the conditions it experiences.
More importantly it tells you when incorrect physical
handling, poor quality packaging or inappropriate temperature
and humidity control will have damaged the quality of
your product,
your reputation and your cash flow.
The comprehensive Windows™
based software programme allows you to programme your
own wake up, warning and alarm levels and frequency of
data collection. When a programmed impact levelis exceeded
a visual alarm will alert you as well as storing the data
for future analysis.
Home | Lamerholm
Electronics | Request
Information
|
4
Channel Strain Gauge Meter
- Math Channel for Summing Inputs, and 4 Anlog Outputs
 The
D3924 series Strain Gauge Meters are the most versatile
and powerful meters on the market. The meter's 6 digit display,
high speed measurement (20/sec. update rate) makes this
the perfect choice for the most demanding applications.
The D3900 also includes 4 analog and 4 alarm relay outputs,
4 assignable front keys, 2 assignable remote inputs and
a variety of menu lockout features. Combine all this with
its good looks, industrialized aluminum case, NEMA 4X construction,
13 indicating LED's, and snap-action buttons.
The D3924 offers four input channels with a fifth channel
for mathematical calculations. Standard formula includes
sum and AVG. A complete math pack is in the D3924 firmware.
Home | ATC
Digitec Products | Request Information |
7700
Laser Series
 The
7700 Series laser provides a method for photoelectric detection
of a small object over long distances. The laser diode sensing
device maintains a tiny spot size, with little divergence
over distances up to 160 feet using a 2" x 2"
retroflector. This allows for long range detection of small
objects. The unit provides precise leading and trailing
edge detection of products on conveyors and packaging machinery.
Sensing of very tightly spaced small objects is also possible
for purposes of counting and batching.
Home | ATC
Digitec Products | Request Information |
|
|
