|
|
 |
|
General
Purpose Melt Pressure Transducers
from ONEhalf20
|
General Purpose Grade Melt Pressure
Transducers are our most popular
series featuring better than .5% accuracy.
General Purpose Melt Pressure Transducers from ONEhalf20
incorporate a liquid filled capillary design. This tried and proven
design provides an electronic signal which is proportional to
the measured pressure, and allows the transducer to operate at
process temperatures up to 750ºF or 400ºC. The electronics
of each transducer are a Wheatstone Bridge -Bonded Strain Gage
design, insuring high accuracy, reliablilty, and repeatability.
Dare
to Compare: Melt
Pressure Competitor Cross Reference Information
ONEhalf20
General Purpose Melt Pressure Transducers are available in two
distinct styles:
| The CT Style Melt Pressure
Transducer, is the classic Melt Pressure Transducer
design. The CT Style Melt Pressure Transducer from ONEhalf20
comprises a 6" rigid stem, along with 18" of flexible
capillary, for optimal thermal isolation. |
 |
| |
CT Style Melt Pressure
Transducer |
 |
|
| The RT Style Melt Pressure
Transducer, which has only a 6" rigid stem, is
a rigid stem only version of the classic style Melt Pressure
Transducer. |
 |
| |
RT Style Melt Pressure
Transducer |
All General Purpose Melt Pressure
Transducers from ONEhalf20
are fully compatible with the industry standard wiring pattern
and color coding, as well as offering 100% mechanical compatibility
with existing Melt Pressure Transducers utilizing the 6 Pin
Bayonet connector. There is seldom a need to re-wire when installing
ONEhalf20 Melt Pressure
Transducers.
With 100% form, fit, and functionality,
at the most competitive prices, General Purpose Melt Pressure
Transducers from ONEhalf20
are rapidly becoming the preferred choice of cost conscious
Plastics Processors throughout the globe.
General Purpose Melt Pressure Transducers from ONEhalf20
offer high accuracy, repeatability, industry standard functionality,
at prices substantially below the competitors.
Features:
-
All ONEhalf20
General Purpose Melt Pressure Transducers come complete with
a 25" interconnecting cable assembly all other manufacturers
charge as much as $100.00 extra for this item
-
Global Leader
in price/performance, quality, and delivery
-
6 Pin Bayonet
Connector – Industry Standard Design – Compatible
Color Coding
-
80% Output Calibration
– Industry Standard
-
Fully interchangeable
with competitors models without re-wiring – 100% Field
Compatibility
-
General Purpose
Grade Featuring .5% accuracy
General
Specifications:
Mechanical
Specifications:
-
Pressure
Ranges:
0-3,000 psi to 0-15,000 psi, Metric ranges are available
-
Mounting:
½- 20 UNF thread, M18 X1.5 available
-
Mounting
Torque:
500 inch pounds maximum, (150 inch pounds recommended)
-
Diaphragm
Material: 15-5PH Stainless Steel
-
Overload
Capacity: 2 times FSO (full scale output)
-
Temperature
Ratings: Diaphragm 750ºF, Electronics 225ºF
-
Accuracy:
Non-Linearity better than .5% FSO
-
Repeatability:
Better than .15% FSO
Electrical
Specifications:
-
Type:
Bonded Strain Gage, 4 Leg Wheatstone Bridge
-
Bridge
Resistance: 350 ohm +/- 5%
-
Output:
3.3mV/Volt, 4-20 mA or 0-10 Vdc are available
-
Excitation
Voltage: 10Vdc Recommended
-
Internal
Calibration:
80% of Full Scale Output
-
Insulation
Resistance:
1,000 Mohms @ 50Vdc
-
|
|
|
CT
Style With
Thermocouple Option
|
Temperature Output:
Type “J”,
Type “K” Thermocouple available
-
Mounting:
½ - 20 UNF,
M18 X 1.5 available
-
Rigid
Stem Length: 6"
3" and 12" Rigid Stem Lengths are available
-
Flex
Armor Length: 18",
lengths to 36" available
-
Calibration
Certificate: NIST traceable calibration certificate
available
-
Interconnecting
Cable Assembly:
25’ Cable Assembly included with Transducer,
up to 100’ available
| General
Purpose Melt Pressure Transducers |
|
|
