ABF Series | EBS Series | MEGA EBS Series | SAF Series | TAF Series
|
|
The ABF filters are suitable for high dirt load filtration requirements and heavy duty conditions.
The cleaning mechanism consists of 3 stainless steel brushes revolving inside the screen cylinder.
|
Features
- Reduce maintenance costs on down stream equipment
- Wide range of filtration
degrees: from 3500 to 200 micron
- Simple cleaning method: stainless steel brushes
- Large filter area: 6000 cm3
- Corrosive resistant: phosphate pre-treated, polyester steel housing. Also available on request, sea water coating or stainless steel housing
- No interruption of flow during flushing
- Minimal water waste: less than 1% of the total flow
- Suitable for high load filtration requirements and heavy duty conditions
- Applications: water supply systems, cooling water, process water, waste water
- In: steel industries, pulp and paper, chemical industries, plastic industries, mining, irrigation etc.
Typical Applications:
- Cooling water in high buildings and industry.
- Polishing effluent water in paper mills.
- Filtration for drip irrigation.
- Municipal drinking water supply.
- Supply water for various industries.
- Elimination of Zebra mussels.
- Golf courses irrigation.
- Pre filtration for ultra filtration and reverse osmosis.
- Sea water filtration
Technical specifications
General
| Maximum flow rate |
700 m³/h |
3100 USgpm |
|
| Minimum working pressure |
1 bar
|
15 psi
|
Consult manufacturer for optimum flow |
| Maximum working pressure |
10 bar |
150 psi |
16 bar (240 psi) upon request |
| Filter area |
6,000 cm² |
930 in² |
|
| Inlet/ outlet diameter |
200,250,300,
350 mm |
8",10"
12",14" |
|
| Filter housing diameter |
400 mm |
16" |
|
| Maximum working temperature |
70°C |
185°F |
|
| Filter screen |
200-3500 micron |
St.St.316L |
| Type of screen |
800-3500 micron |
perforated screen |
| 200- 800 micron |
wedgewire screen |
| Weight |
200mm = 213kg |
8" = 470 lb. |
|
| 250mm = 228kg |
10" = 503 lb. |
| 300mm = 237kg |
12" = 523 lb. |
| 350mm = 260kg |
14" = 573 lb. |
Flushing Data
| Exhaust valve |
50mm |
2" |
or 80 mm (3") when pressure lower than 2.5 bar |
| Flushing cycle time |
15 sec. |
15 sec. |
40 sec. |
| Wasted water per cycle |
200 litre |
15 gallon |
280 litre |
| minimum flow for flushing |
50 m³/h |
220 USgpm |
25 m³/h |
Control & Electricity (electronically controlled types)
| Electric motor |
1/2 HP / 14 Output R.P.M |
| Rated operation voltage |
3 phase, 380V 50 HZ, or 220/440V 60HZ |
| Upon request |
24V DC / 12 VDC |
| Control voltage |
24V AC ( 24V DC upon request) |
Construction Materials
| Filter housing and lid |
Carbon steel 37-2.
(Stainless steel 316 available on request) |
| Screen |
Stainless steel 316 |
| Cleaning mechanism |
Stainless steel 316, PVC and Delarin |
| Exhaust valve |
Epoxy coated cast iron |
| Seals |
Nitril rubber, Natural rubber, Teflon |
| Control system |
Brass, Stainless steel, engineering plastic, Polyethylene |
Standard Filtration Degrees
| |
perforated screen |
| micron |
3500 |
2500 |
1500 |
800 |
 |
| mm |
3.5 |
2.5 |
1.5 |
0.8 |
| mesh |
4 |
6 |
10 |
20 |
| |
Wedgewire Screen |
| micron |
800 |
500 |
300 |
200 |
 |
| mm |
0.8 |
0.5 |
0.3 |
0.2 |
| mesh |
20 |
30 |
50 |
80 |
|
