|
 The
in-line measurement of bulk solids flow is important for product
quality, process efficiency and system safety. The Granucor
system provides continuous, real-time flow measurement of dense
phase pneumatically conveyed bulk solids or of free falling
materials. Its non-intrusive design and patented software can
be used to monitor and control the flow in pipes or the flow
distribution through pipe networks.
The
complete Granucor system can measure and output:
?
Bulk Flow Rate
?
Totalized Flow
?
Concentration
?
Velocity
Capacitance
Flow Measurement
A
complete Granucor system is composed of two independent sensors
and a correlator/ integrator. The DK13 Velocity Sensor and the
DC13 Concentration Sensor operate using capacitance technology
and are designed for direct installation into process piping.
The concentration sensor measures the change in capacitance
with material present versus the capacitance of an empty pipe.
This change in capacitance is proportional to the material concentration.
The velocity sensor uses two measuring points and a technique
known as cross-correlation to measure the time it takes for
the material to travel between the points. The two-capacitance
measurements are output to the MT2109 correlator/integrator,
which calculates the mass flow rate.
System
Features
?
Easy installation into new or existing processes.
?
Non-intrusive, with no moving parts.
?
Sensors are available in sizes ranging from 1/2" to 8" (15 -
200mm) nominal diameter in ANSI or DIN flange configurations.
?
Unaffected by pressure, temperature and vibration.
?
Self-diagnostics with fault indication.
?
Displays solid mass flow, solids velocity and solids concentration.
|
