Laboratory Stirrers from Cleveland Eastern

Three models are offered. Air or electric powered models are available. Units are equipped with standard 304 stainless steel shafts and propellers. Solid state DC variable speed controls provide efficient, thorough mixing up 30 gallons.

Laboratory Stirrers, Cleveland

Model 5VB Variable Speed Electric Lab Stirrer

Application

  • Heavy duty

  • Continuous operation laboratory mixer

  • Well suited for experimental, pilot plant and light industrial applications.

Capacity

Thorough mixing action of light liquids up to 30 gallon volumes.

Features

  • Continuous duty.

  • Solid State Variable speed control.

  • Quiet, vibration free operation.

  • Three wire cord and plug.

  • TEFC Motor.

  • Jacob's adjustable chuck for shaft sizes to 3/8" diameter.

Construction

  • Speed control mounted to end of motor for easy accessibility

  • 3" diameter 304 stainless steel propeller.

  • 304 stainless steel shaft 3/8" x 12" long.

Motor

  • Continuous duty

  • 1/40 HP - 1800 RPM - 115/50/60/1 phase TEFC

  • 150 watts - w/overload protection and internal fuse.

Weight

4 pounds.

Mounting

Ring stand or c-clamp mount.

Speed Control

Solid state speed control from 50 RPM to 1700 RPM - constant torque.

Size

Speed control and motor assembly 5-3/4" x 3".

Lab Stirrer Product Manual

Laboratory Stirrers, Cleveland

Model 8A Heavy Duty Lab Stirrer

Application

  • Heavy duty

  • Well suited for industrial applications, especially heavier viscous liquids.

  • Constant and precise speed controI with integrated gear reducer and solid state speed control from 80 to 725 RPM.

Capacity

Extensive mixing/blending up to 30 gallons.

Features

  • Jacob's adjustable chuck.

  • Gear reduced with permanent oil seals prevents any seepage into process

  • 1/15 HP DC motor.

Construction

  • High quality white enamel coating for motor and speed control.

  • 304 stainless steel 1/2" x 24" shaft.

  • 304 stainless steel 5-1/2" two bladed propeller

  • Three wire cord and plug overload protection.

Motor

  • Continuous duty.

  • Permanent magnet - 1/15 HP.

  • Gear reduced to 725 RPM.

  • 115/50/60/1 AC - 110 watts w/overload protection.

Weight

9 pounds

Mounting

Ring stand or c-clamp mount.

Speed Control

Speed control from 80 RPM to 725 RPM.

Dimensions

Speed control and motor assembly 4-3/4" x 6-1/2" x 7".

Lab Stirrer Product Manual

Laboratory Stirrers, Cleveland

Model A6R Air Powered Lab Stirrer

Application

  • Heavy duty air driven

  • Variable speed

  • Safe operation in any liquid and environment

  • Explosion proof

  • Suitable for experimental, pilot plant and light industrial applications in hazardous or flammable environments.

Capacity

Provides thorough mixing of liquids up to 25 gallon volumes.

Features

Continuous duty - explosion proof - variable speed non-overloading.

Construction

  • 304 Stainless steel, 3" diameter, two bladed Propeller

  • 304 Stainless steel shaft (3/8" x 12")

  • Motor provided with outboard thrust bearing.

  • Jacob's adjustable chuck.

Motor

  • Non-reversing Air motor - 1/10 HP with air muffler for quiet operation

  • 30-95 PSI

  • Intake connection 1/8" NPT - male

  • Maximum air consumption: 10 CFM @ 95 PSI @ 1800 RPM

Weight

2.25 pounds.

Mounting

Ring stand or c-clamp mount.

Speed Control

Variable speed by means of an air valve, 50 RPM to 1800 RPM.

Size

Motor only 2.25" diameter x 6" high.

Lab Stirrer Product Manual

Site Design - www.process-controls.com
Back to Top