OPEN
DRIP PROOF - MODELS SP-280 (ELECTRIC)
Engineered for use in mildly corrosive environments. Valox
motor housing provides added chemical resistance. The ODP
is thermally protected and equipped with a manual reset switch
for safety. 115V models include a 16 ft. SJT3 wire cord with
molded plug. 220V models feature an IP 44 enclosure. Weight
9 lbs. (4kg). NOT SUITABLE FOR PUMPING
FLAMMABLES.
SP-280P
115V/1/60 Hz 825W 1.1hp 8.5 amp 
,
SP-280P V 115V/1/60 Hz 825W 1.1hp 8.5 amp Var. Speed
,
SP-280 2P 220V/1/50 Hz 825W 1.1hp 5 amp CE
SP-280 2P 2 V 220V/1/50 Hz 825W 1.1hp 5 amp Var. Speed
CE
WARNING: Pumping of flammables or combustible liquids
can generate a static electric discharge, causing fire or
explosion resulting in injury or death. Read and understand
operating instructions before starting this unit. Follow all
federal, state and local safety codes including NFPA 30 --
NFPA77. Prior to connecting to air supply, install bond and
ground wires and check continuity of each wire. A meter reading
of one ohm or less is required for safe liquid transfer. Use
only metallic drum, receiving vessel and metallic pump (SP-SS)
when pumping flammables. Air motors are not recognized under
any current Underwriter's Laboratory listing program. Consult
a qualified engineer for suitability for use in a hazardous
area or on flammables.
TEFC
- MODELS SP-ENC (ELECTRIC)
Engineered for use in highly corrosive environments, or where
high levels of fumes are present. Blue anodized housing provides
excellent chemical resistance. All motors are equipped with
a manual reset switch for safety. 115V models include a 16
ft. SJT3 wire cord with molded plug. 220V models feature a
double insulated IP 54 enclosure. Weight 7.5 lbs. (3.4kg).
NOT SUITABLE FOR PUMPING FLAMMABLES.
SP-ENC
115V/1/60 Hz 825W 1.1hp 8.5 amp ,
SP-ENC V 115V/1/60 Hz 825W 1.1hp 8.5 amp Var. Speed
,
SP-ENC 2 220V/1/50 Hz 825W 1.1hp 5 amp CE
SP-ENC 2 V 220V/1/50 Hz 825W 1.1hp 5 amp Var. Speed
CE
WARNING:
Pumping of flammables or combustible liquids can generate
a static electric discharge, causing fire or explosion resulting
in injury or death. Read and understand operating instructions
before starting this unit. Follow all federal, state and local
safety codes including NFPA 30 -- NFPA77. Prior to connecting
to air supply, install bond and ground wires and check continuity
of each wire. A meter reading of one ohm or less is required
for safe liquid transfer. Use only metallic drum, receiving
vessel and metallic pump (SP-SS) when pumping flammables.
Air motors are not recognized under any current Underwriter's
Laboratory listing program. Consult a qualified engineer for
suitability for use in a hazardous area or on flammables.
EXPLOSION
PROOF - MODELS SP-EXP (ELECTRIC)
Engineered for use in Class 1, Division 1, Groups C & D environments.
Thermally protected with a manual reset for safety. This motor
series is the proper choice when transferring combustible
or flammable liquids in hazardous environments. Weight 11.4
lbs. (6.3 kg).
SP-EXP
115V/1/60 Hz 825W 1.1hp 8.5 amp ,
Class
1, Div 1, C&D;
SP-EXP 2 220V/1/50 Hz 825W 1.1hp 5 amp CE Group IIC
CAUTION:
Must be used in conjunction with any SP-SS pump end. Do not
use a plastic pump end in a hazardous duty environment. Must
securely Bond and Ground the pump and motor when pumping flammables
or when using in a hazardous environment. Read operating instructions
before using motor and obey ALL safety laws and regulations.
The SP-EXP should be approved by a Safety Engineer before
using.
