Oil Dispersant Spray Systems

Megator oil spill dispersant spray systems are portable light weight sets that can be quickly and easily mounted on tugs, offshore supply vessels and other pollution control craft responding to marine emergency oil spills situations.

The oil spill dispersant spray systems consists of a self priming positive displacement pump, prime mover, dispersant flowmeter, relief valve and interconnecting pipework, all mounted on an aluminium frame.

• Open sea or inshore duty

• Suitable for below or above deck mounting

• Diesel or electric drive

• Three standard units

• Will not be damaged if run with a dry suction

• Self priming with powerful suction performance

• The original Megator oil dispersant spray system was tested and approved by the Warren Spring Laboratory

Oil dispersant consumption is appreciably reduced by using Megator oil dispersant spray systems. With its outstanding self priming and dry running capability, the Megator oil spill dispersant spray system can be stopped after the first run through an oil slick and then simply restarted for the second pass without the worry of loss of prime.

Megator oil spill dispersant spray systems do not require an additional pump or eductor to pump diluted dispersant. This makes installation, operation and maintenance of the unit extremely easy.

Used to pump either neat or dilute dispersant. Dispersant dilution gives between 6% and 30% pumping ratio with sea water

Systems suitable for use with 50Hz eletric supply

Systems suitable for use with 60Hz eletric supply

Pump total head - 30 metres (100 ft)

Pump Specification
Megator L-type positive displacement, sliding-shoe pump with aluminum casing, stainless steel rotor, port plate and mechanical seals.

Electric Motors
IP56, T.E.F.C. to Lloyds regulations for below-decks service. Suitable for 380-440 volts, 3 phase, 50-60Hz supply (other voltages available on request).

Diesel Engines
Single cylinder, vertical 4 cycle air cooled complete with fuel filter, air cleaner exhaust muffler, fuel tank and recoil start.

Pipework
Unit supplied complete with interconnecting pipework, relief valve and vacuum limiting valve fitted to pump. Dispersant suction fitted with isolating and non-return valve. Suction and discharge fitted with snaplock connections.

Dispersant Flowmeter

PVDF paddle wheel flowmeter complete with 4 digit LCD display.

Options

• Dispersant spray arms

• Total flowrate flowmeter

• Electric start diesel engine

• Starter complete with remote start/stop facility

• Spares kit

Purpose Built Sets
In addition to the oil spill dispersant spray systems detailed above, Megator can design and supply purpose built sets to meet customers individual specifications.

Oil Spill Dispersant Spray Systems