Out-of-Tank Bag Filter Systems from Sethco

Out-of-Tank, Bag Filter Systems, SethcoCPVC/PVC/Kynar/SS Out-Of-Tank Filter Systems

Complete systems include a pump and motor, chamber, filter bag, inlet and discharge hoses and all accessories required to set up and operate the system. All systems (except with ZDX Series pumps) are mounted on a corrosion resistant rigid plastic panel on rubber tire /ball bearing casters or rubber feet, depending on model. DBG-1/2, 1 & 1 ½ chambers sold with a Model ZDX pump come with a adjustable polypropylene mounting panel. Chamber models 2, 3 & 5 are provided with a coated steel base unless customer requests tank flange mount.

Features

  • Filtration to 7500 GPH (28,390 LPH)

  • Filters Corrosive liquids down to 1 micron at temperatures to 200°F (93 °C)

  • CPVC Construction to 200°F (93°C),PVC to 140°F (60°C),Kynar to 210°F (99°C)

  • Chamber pressure to 60 PSI at 73°F (23°C)
    (derate as temperature increases). For higher pressures or temperatures,consult factory.

  • Easy "Drop-in " filter bag replacement.

  • Positive bag seal prevents any liquid by-pass.

  • Low cost filtration through reuse and finally through less bulky media disposal.

Out-of-Tank, Bag Filter Systems, SethcoApplications

Sethco Bag Filter chambers and Systems are engineered to provide economical removal of foreign particulates from a wide range of chemical solutions including most metal finishing applications. When properly equipped they are suitable for chrome plating solutions as well as electroless copper and electroless nickle, to 200°F (93°C). Always advise Sethco of your application when ordering.

  • Metal Finishing

  • Chrome Plating

  • Electroless Copper

  • Electroless Nickel

560 Bulletin

562 Bulletin

Back to Top